Page 5 of 20
SVT COBRA SPECIFIC FEATURES
²4.6L DOHC 32V V±8 Engine Ð 320 horsepower,
317 lb-ft torque
²Anti-lock Brake System with Traction Controly
²Limited-slip independent rear suspension
²Engine oil cooler
²Round fog lamps
²Sport seats
²Premium electronic AM/FM stereo/CD
²Dual illuminated visor mirrors
²Unique wheels and tires
SPORT INSTRUMENT CLUSTER
40
P! BRAKE
0
00000 00
EF
10 20406080
6010 014 0
180
220
260
100
120
140
1604
5
6
7
8 3
2
1
THEFT
RPMX1000
SELECT/RESET
LOW
FUELO/D
OFF AIR
BAGSERVICE
ENGINE
SOON
MPH km/h
ABS
.PREMIUM
UNLEADED FUEL ONLY
L
HL
HC
CHECK
FUEL
CAP
SVT Cobra specific features
5
Page 7 of 20
Item Description
ConfigurationLongitudinally mounted,
90-degree V8, cast aluminum
cylinder block and cylinder
heads
Bore x Stroke90.2 x 90.0 mm
(3.55 x 3.54 in)
Displacement4601 cc/280 cid
Compression ratio9.85:1
Horsepower239 kW @ 6000 rpm
(320 HP @ 6000 rpm)
Torque430 Nm @ 4800 rpm
(317 lb.-ft. @ 4750 rpm)
Redline6800 rpm
(fuel shut-off at 7000 rpm)
Specific output66.269.6Hp per liter
ValvetrainDual overhead chain-driven
cams, roller finger followers
with hydraulic lash
adjustment, ovate-wire valve
springs, four valves per
cylinder
Fuel systemSequential electronic fuel
injection
Mass air sensor80 mm (3.15 in) diameter
Throttle bodyTwin 57 mm (2.24 in)
diameter bore-simultaneously
open
Exhaust manifoldsCast-high silicon,
molybdenum iron
Exhaust systemDual-stainless steel
Engine/Transmission
7
Page 14 of 20

MOTORCRAFT PART NUMBERS
Component 4.6L DOHC V8 engine
Air filter element FA-1634
Fuel filter FG-800A
Battery BXT-59
Oil filter FL-820S
PCV valve EV-111153
Spark plugs* AWSF-32E
* Refer to Vehicle Emissions Control Information (VECI) decal for
spark plug gap information.
REFILL CAPACITIES
Fluid Ford Part Name Capacity
Brake fluid High Performance
DOT 3 Motor
Vehicle Brake
FluidFill to line on
reservoir
Engine oil
(includes filter
change)Motorcraft SAE
5W-20Super
Premium Motor
Oil5.7L (6.0 quarts)
Engine coolant
1Premium Engine
Coolant13.3L
(14.1 quarts)
Power steering
fluidMotorcraft
MERCONtAT FFill to between
MIN and MAX
lines on reservoir
Rear axle
lubricant
2Motorcraft SAE
80W-90 Premium
Rear Axle
Lubricant1.4L (2.9 pints)
Fuel tank N/A 59.4L
(15.7 gallons)
Transmission
fluid
3Motorcraft
MERCONtAT F3.1L (6.6 pints)4
Windshield washer
fluidUltra-Clear
Windshield Washer
Concentrate3.8L (4.0 quarts)
1Use Ford Premium Engine Coolant (green in color). DO NOT USE
Ford Extended Life Engine Coolant (orange in color). Refer to
Adding engine coolant, in the Maintenance and Care chapter.
Maintenance
14
Page 15 of 20

2Rear axle lubricants do not need to be checked or changed unless a
leak is suspected, service is required or the axle assembly has been
submerged in water. The axle lubricant should be changed any time
the rear axle has been submerged in water. Fill 6 mm to 14 mm (1/4
inch to 9/16 inch) below bottom of fill hole. Add 118 ml (4 oz.) of
Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford
specification EST-M2C118±A for complete refill of Traction-Lok axles.
3Ensure the correct automatic transmission fluid is used.
Transmission fluid requirements are indicated on the dipstick or on
the dipstick handle. MERCONtand MERCONtV are not
interchangeable. DO NOT mix MERCONtand MERCONtV. Refer to
your scheduled maintenance guide to determine the correct service
interval.
4Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
OCTANE RECOMMENDATIONS
Your vehicle is designed
to use ªPremiumº
unleaded gasoline with
an (R+M)/2 octane
rating of 91 or higher for optimum performance. The
use of gasolines with lower octane ratings may
degrade performance. We do not recommend the
use of gasolines labeled as ªPremiumº in high
altitude areas that are sold with octane ratings of
less than 91.
If your engine knocks under most driving conditions
while you are using fuel with the recommended
octane rating, see your dealer or a qualified service
technician to prevent any engine damage.
91(R+M)/2 METHOD
Maintenance
15