2001 FORD EXPLORER SPORT TRAC tailgate

TAILGATE LOCK
Your vehicle is equipped with a
tailgate lock designed to prevent
theft of the tailgate.
²Insert ignition key and turn to the
right to engage lock.
²Turn ignition key to the left to
unlock.
TAILGATE REMOVAL
Your tailgate is removable to allow
more room for loading.
1. Lower the tailgate.
2. Use a screwdriver to pry the
spring clip (on each connector) past
the head of the support screw.
Disconnect cable.
3. Disconnect the other cable.
4. Lift tailgate to a 45 degree angle.
5. Lift right side off of its hinge.
6. Lift left side off of its hinge.
To install, follow the removal
procedures in reverse order.
Controls and features
75

CARGO CAGE (IF EQUIPPED)
Your vehicle may be equipped with a cargo cage designed to extend the
pickup box for larger loads.
To extend the cargo cage:
1. Lower tailgate.
2. Pull the round knobs on each side
of the cargo cage to release it from
the pickup box.
Red markings behind the knobs
indicate the unlocked position.
3. Lift the cargo cage over on to the
tailgate.
Controls and features
76

4. Evenly push down on the cargo
cage and push the round knobs in
on each side locking it in place.
To stow the cargo cage, follow steps
one through four in reverse order.
The cargo cage may be used to
secure a load of up to 46 kg
(100 lbs.) on the tailgate.
The cargo cage should always be
kept in the stowed position with
the tailgate closed when not in
use.
Controls and features
77

Replacing tail lamp/turn/backup lamp bulbs
The tail lamp/turn/backup lamp bulbs are located in the same portion of
the tail lamp assembly, one just below the other. Follow the same steps
to replace either bulb:
1. Lower the tailgate to expose the
lamp assembly.
2. Remove the three rubber plugs,
screws and the lamp assembly from
vehicle.
3. Rotate bulb socket
counterclockwise and remove from
lamp assembly.
4. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
5. Install the bulb socket in lamp
assembly by turning clockwise.
6. Install the lamp assembly and
secure with three screws and rubber
plugs.
Replacing foglamp bulbs
1. Remove the bulb socket from the
foglamp by turning
counterclockwise.
2. Disconnect the electrical
connector from the foglamp bulb.
3. Connect the electrical connector to the new foglamp bulb.
4. Install the bulb socket in the foglamp turning clockwise.
Replacing high-mount brakelamp and cargo lamp bulbs
The replacement of the high-mount brakelamp bulb and cargo lamp bulb
is basically the same. This procedure covers the high-mount brakelamp
bulb.
Maintenance and care
223

for adults .........................103±105
for children .....................117±118
lap belt ....................................107
warning light and
chime ...................10, 13, 107±108
Safety seats for children ..........119
Seat belts (see Safety
restraints) ..................................102
Seats
child safety seats ....................119
cleaning ...................................231
SecuriLock passive anti-theft
system ....................................92±94
Servicing your vehicle ..............182
Snowplowing .................................3
Spark plugs,
specifications .....................233, 238
Special notice ................................3
ambulance conversions ..............3
utility-type vehicles ....................3
Specification chart,
lubricants ...........................235, 238
Speed control ..............................56
Speedometer ...............................14
Starting your vehicle ........127, 129
jump starting ..........................174
Steering wheel
tilting .........................................61
T
Tachometer .................................16
Tailgate ........................................75Tires ...........................168, 203±204
changing ..........................168, 171
checking the pressure ............204
replacing ..................................206
rotating ....................................205
snow tires and chains ............207
tire grades ...............................204
treadwear ................................203
Tonneau cover .............................80
Towing .......................................150
recreational towing .................156
trailer towing ..........................150
wrecker ....................................180
Traction-lok rear axle ...............135
Transfer case
fluid checking .........................199
Transmission
automatic operation ...............136
fluid, checking and adding
(automatic) .............................196
fluid, refill capacities ..............233
lubricant specifications ..235, 238
manual operation ....................140
Trip odometer .............................15
Trunk ...........................................83
Turn signal ............................11, 55
V
Vehicle dimensions ...................238
Vehicle Identification Number
(VIN) ..........................................240
Vehicle loading ..........................148
Ventilating your vehicle ...........131
Index
259