Downloaded from www.Manualslib.com manuals search engine Engine
1. Remove the hood. For additional information, refer to Section 501-02.
2. WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel-related components. Highly flammable mixtures are
always present and may be ignited. Failure to follo w these instructions may result in personal injury.
Relieve the fuel system pressure. For additional in formation, refer to
Section 310-00.
3. Discharge the A/C system. For additional informat ion, refer to
Section 412-03.
4. Remove the battery tray. For additional informati on, refer to
Section 414-01.
5. Remove the air cleaner outlet tube. For additiona l information, refer to
Section 303-12.
6. Disconnect the vacuum hoses at the (1) fuel press ure regulator and the (2) intake manifold.
7. Disconnect the vacuum lines from the (1) exhaust recirculation valve, the (2) positive crankcase ventilation valve, and the (3) idle air control valve.
8. Disconnect the (A) two vacuum lines, remove the ( B) two bolts, and position the (C) vacuum tree aside.
9. Disconnect the (1) speed control cable (if equipp ed) and the (2) accelerator cable (9A758) from the throttle control lever (9A776).
SECTION 303-01A: Engine — 2.0L SPI 2001 Escort Workshop Manual
REMOVAL Procedure revision date: 07/14/2000
Special Tool(s)Disconnect Tool, Spring Lock Coupling (1/2")
310-D005 (D87L-9280-B) or equivalent
Brackets, Engine Lifting
303-050 (T70P-6000)
Support Bar, Engine
303-D063 (D88L-6000-A) or equivalent
102001 Escort Workshop Manual
6/27/2010http://www.fordtechservice.dealerconnection.com/pub s/content/~WS1F/~MUS~LEN/19/S...
Downloaded from www.Manualslib.com manuals search engine
26. Remove the A/C line bracket bolt.
27. Disconnect the A/C manifold and tube spring lock coupling at the accumulator/drier. For additional information, refer to
Section 412-03.
28. Disconnect the A/C manifold and tube spring lock coupling at the condenser. For additional information, refer to
Section 412-03.
29. Remove the accessory drive belt, the auto tensio ner and, if vehicle is equipped with A/C, the accessory drive belt idler. For additional information, refer to
Section 303-05.
30. Suction out the power steering fluid from the po wer steering reservoir.
31. NOTE: Position a drain pan under the power steering reser voir.
Disconnect the power steering lines.
Loosen the clamp and disconnect the (A) power steer ing reservoir pump hose (3691) at the reservoir. Disconnect the (B) power steering pressure hose (3A719).
32. Raise and support the vehicle. For additional in formation, refer to
Section 100-02.
33. Remove the (A) wheel nuts (1012) and the (B) fro nt wheel and tire assemblies.
102001 Escort Workshop Manual
6/27/2010http://www.fordtechservice.dealerconnection.com/pub s/content/~WS1F/~MUS~LEN/19/S...
