2001 FORD ESCAPE Engine

[x] Cancel search: Engine

Page 226 of 280

FORD ESCAPE 2001 1.G Owners Manual Observe the following guidelines when handling automotive fuel:
²Extinguish all smoking materials
and any open flames before
fueling your vehicle.
²Always turn off the vehicle before
fueling.
²Auto

Page 227 of 280

FORD ESCAPE 2001 1.G Owners Manual The flow of fuel through a fuel pump nozzle can produce static
electricity, which can cause a fire if fuel is pumped into an
ungrounded fuel container.
Use the following guidelines to avoid static bui

Page 228 of 280

FORD ESCAPE 2001 1.G Owners Manual Fuel quality
If you are experiencing starting, rough idle or hesitation driveability
problems during a cold start, try a different brand of ªRegularº unleaded
gasoline. ªPremiumº unleaded gasoline

Page 229 of 280

FORD ESCAPE 2001 1.G Owners Manual Fuel Filler Cap
Your fuel tank filler cap has an indexed design with a 1/8 turn on/off
feature.
When fueling your vehicle:
1. Turn the engine off.
2. Carefully turn the filler cap counterclockwise 1/8

Page 230 of 280

FORD ESCAPE 2001 1.G Owners Manual Fuel Filter
For fuel filter replacement, see your dealer or a qualified service
technician. Refer to the scheduled maintenance guide for the appropriate
intervals for changing the fuel filter.
Replace

Page 232 of 280

FORD ESCAPE 2001 1.G Owners Manual ²Idling for long periods of time (greater than one minute) may waste
fuel.
²Anticipate stopping; slowing down may eliminate the need to stop.
²Sudden or hard accelerations may reduce fuel economy.

Page 234 of 280

FORD ESCAPE 2001 1.G Owners Manual Do not park, idle, or drive your vehicle in dry grass or other dry
ground cover. The emission system heats up the engine
compartment and exhaust system, which can start a fire.
Illumination of the
ind

Page 235 of 280

FORD ESCAPE 2001 1.G Owners Manual Allow the vehicle to sit for at least eight hours without starting the
engine. Then, start the engine and complete the above driving cycle. The
engine must warm up to its normal operating temperature.