162n
Changing a wheel
The vehicle jack is designed for
changing wheels only. Do not
attempt to raise another vehicle model
with it or to raise any load of any kind.
To do so could cause accidents and
personal injury.
To ensure continued safety, have the
tightness of the lug bolts checked with
a calibrated lug wrench [torque specifi-
cation: 72 lb.ft (100Nm)] at the earliest
opportunity.<
When storing the wheel, be sure that
you do not damage the retaining pin in
the spare tire recess.
If light-alloy wheels other than original
BMW light-alloy wheels have been
mounted, it may be necessary to use
different lug bolts for those wheels.
Replace the defective tire as soon as
possible and have the new wheel/tire
balanced.
For black-painted aluminum wheels
*,
use only those balancing weights
approved by BMW for use with light-
alloy wheels. Never attempt to balance
these wheels using standard balance
weights.
Driving with the space-saver
spare tireDrive cautiously and do not exceed a
speed of 50 mph (80 km/h).
Be aware that vehicle handling will be
altered. Slower brake response time,
longer braking distances and changed
steering characteristics may be anti-
cipated when approaching limit condi-
tions.
The changes in handling characteristics
will be even more pronounced in
conjunction with winter tires.
Only one space-saver spare tire
may be mounted at a time. Mount
a wheel and tire with the same size
and specifications as the others at the
earliest possible opportunity. Maintain
correct tire pressures. Refer to
page 28.<
175n
IndexDataTechnologyRepairsCar careControlsOverview
Deceleration sensors continuously
monitor the acceleration forces acting
upon the vehicle. If, as the result of a
frontal collision, a deceleration is
reached at which the protection of the
safety belts alone is no longer
adequate, the gas generators of the
driver and passenger-front airbags are
ignited. However, the passenger-side
airbag is only triggered if an additional
sensor has recognized that the
passenger seat is occupied.
In the event of a side collision, the head
and side airbags in the front or rear
* are
triggered if necessary.
390de319
The airbags located under the marked
covers inflate and unfold in a matter of
a few milliseconds. In this process, they
tear through the designed separation
points of the upholstered covers or
press them out.
Because the inflation process must be
virtually instantaneous, it is accompa-
nied by a certain amount of ignition and
inflation noise, which will be drowned
out by the noise from the accident
itself. The gas required to inflate the
airbags is not dangerous, and the
associated smoke then dissipates.
The entire process is completed within
fractions of a second.Highly sensitive sensors monitor the
number of revolutions of the wheels.
When equipped with DSC, they also
monitor steering angle, lateral accelera-
tion, brake pressure and the movement
of the vehicle around its vertical axis.
If differences in the wheel speeds
occur, ASC+T counteracts the danger
of wheelspin by reducing engine
torque; if necessary, ASC+T will also
respond by applying the brakes to the
rear wheels.
In addition, DSC permanently monitors
the vehicle's current operating condi-
tion and compares it with an ideal
condition that is calculated from the
sensor's signals. If deviations from this
occur (understeering or oversteering,
for instance), DSC can stabilize the
vehicle in fractions of a second by
reducing engine output and with the
assistance of braking intervention at
individual wheels. As a result,
dangerous skids can be prevented even
as they are just beginning. But this is
only possible within the laws of physics.
You may need some time to become
accustomed to this system's interven-
tion. However, it provides optimum
drive force and vehicle stability.
The braking intervention may be
accompanied by sounds specific to
the system.
Airbags ASC+T/DSC
*
Everything from A to Z
197n
IndexDataTechnologyRepairsCar careControlsOverview
Switching off the engine64
Symbols4,164
Synthetic oils136 T
Tachometer75
Tail lamp assembly, bulb
replacement155
Tail lamps155
Tank capacity187
Technical data184
Technical
modifications6,148
Telephone hookup104
Telephone, refer also to the
separate Owner's Manual
Temperature display
outside temperature78
Temperature gauge
engine coolant76
Temperature
layering93,100
Temperature,
adjusting92,98
Thigh support
adjustment49
Third brake lamp157
Three-point-safety belt in the
rear106
Through-loading
system106 Tilt sensor alarm
system36,43
remote control36
Tire
codes125,127
condition122
damage122
inflation
pressure27,122
replacement123
rotation124
tread122
Tire pressure
checking27
monitoring85,179
Tire Pressure Control
(RDC)85,179
Tire Quality Grading123
Tools152
Torque184
Towing eyelets169
Towing the vehicle169
Track185
Traction Control System,
refer to DSC82
Transmission66
Transmitter key32
Transporting children
safely60
Tread depth, tires122
Tread wear indicator122 Trip odometer75
Trunk lid, refer to luggage
compartment lid
Turn signal indicator23,70
bulb replacement154
Turning radius185
Two-way radios121
U
Uniform Tire Quality
Grading123
Used batteries165 V
Vacuum cleaner105
Vanity mirror, bulb
replacement158
V-belts188
Vehicle battery163,188
Vehicle care
exterior142
interior144
Vehicle Identification
Number (VIN)139
Vehicle immobilizer33
Vehicle painting142
Vehicle starting63
Vehicle storage147
Vehicle vacuum cleaner,
attaching105
Vehicle weight186 Ventilation90,93,96
draft-free93,100
Vinyl upholstery, care144
Voice recognition24
W
Warning flashers25
Warning lamp "Please fasten
safety belts"21
Warning lamps20
Warning messages77
Warning triangle25
Warranty and Service Guide
Booklet140
Washer fluids134,187
Washer nozzles,
adjusting134
Washer reservoir, filling134
Washer system70
Washing your vehicle141
Water on roadways113
Waxing, paintwork143
Wear indicator in the
tires122
Weights186
Wheel lug wrench159
Wheel rims125,127
Wheel, changing159
Wheelbase185
Wheels and tires125,127
Width185
