2001 BMW 325XI torque

167n
IndexDataTechnologyRepairsCar careControlsOverview
Changing a wheel9 Position the new wheel or the
space-saver spare tire on the hub
and screw at least two lug bolts
finger-tight into opposite bolt holes
10 Screw in the remaining lug bolts.
Tighten all the bolts securely
11 Lower the jack and remove it from
beneath the vehicle
12 Tighten the lug bolts in a diagonal
pattern462de267
13 Wheels with full wheel covers
*:
Position the wheel cover with the
valve opening over the valve (arrow)
and press it onto the wheel with
both hands
14 Check and correct the tire's inflation
pressure at the earliest possibility.
For vehicles with RDC (Tire Pres-
sure Control):
Reactivate the system after
mounting the spare wheel or
correcting the inflation pressure.
Refer to page 86.
Use original BMW full wheel
covers only. Other wheel covers
may not fit securely. The full wheel
cover may not be installed on the
space-saver spare tire, since this could
damage the cover.<
460de125
The vehicle jack is designed for
changing wheels only. Do not
attempt to raise another vehicle model
with it or to raise any load of any kind.
To do so could cause accidents and
personal injury.
Have the lug bolts checked for proper
tightness with a calibrated torque
wrench at the earliest possibility [torque
specification: 72 lb.ft. (100 Nm)].<
When storing the wheel, be sure that
you do not damage the retaining pin in
the spare tire recess.
If light-alloy wheels other than Original
BMW light-alloy wheels have been
mounted, it may be necessary to use
different lug bolts for those wheels.
Replace the defective tire as quickly as
possible and have the new wheel
balanced.

180n
ASC+T/DSC
*
Highly sensitive sensors monitor the
number of revolutions of the wheels.
When equipped with DSC, they also
monitor steering angle, lateral accelera-
tion, brake pressure and the movement
of the vehicle around its vertical axis.
If differences in the wheel speeds occur,
ASC+T counteracts the danger of
wheelspin by reducing engine torque; if
necessary, ASC will also respond by
applying the brakes to the rear wheels.
In addition, DSC permanently monitors
the vehicle's current operating condition
and compares it with an ideal condition
that is calculated from the sensor's
signals. If deviations from this occur
(understeering or oversteering, for
instance), DSC can stabilize the vehicle
in fractions of a second by reducing
engine output and with the assistance of
braking intervention at individual
wheels. As a result, dangerous skids can
be prevented even as they are just
beginning, but only within the laws of
physics.
You may need some time to become
accustomed to this system's interven-
tion. However, it provides optimum
drive force and driving stability.
The braking intervention may be
accompanied by sounds specific to the
system.

182n
Four-wheel driveThe transmission of power to the four
drive wheels is provided permanently
through a transfer box. The distribution
of torque between the front and rear
axles is 38% to 62%.
Traditional differential locks at the front
and rear axles and in the transfer box
are not required. Their function is taken
over by automatic braking intervention
at all four wheels. These traction inter-
ventions are governed by Automatic
Differential Brake (ADB-X), a sub-func-
tion of DSC.
If a wheel tends to slip, it is braked
automatically by ADB-X until it once
again gains traction, and drive force
can be transmitted to that wheel. In
addition, the drive force is distributed to
the remaining wheels during this 530us133
system intervention. Engine output is
also reduced if necessary.
When the DSC is deactivated, the
ADB-X traction intervention is set for
the maximum drive force. However, the
engine intervention and the stability
controls are no longer available. For
this reason, DSC should only be deacti-
vated in the exceptional circumstances
described on page 84.
The BMW 325xi and 330xi are not
intended for off-road operation. But the
permanent four-wheel drive provides a
high degree of driving stability and trac-
tion on all road conditions and surfaces.
It supports you in critical driving condi-
tions, e.g. in extreme winter conditions
or on loose road surfaces.

192n
BMW 320i BMW 325i/325xi BMW 330i/330xi
Displacement
Number of cylinders cu in (ccm) 132.5 (2,171)
6152.2 (2,494)
6181.8 (2,979)
6
Maximum output
at engine speed hp (kW)
rpm168 (124)
6,250184 (135)
6,000225 (165)
5,900
Maximum torque
at engine speedlb ft (Nm)
rpm155 (210)
3,500175 (237)
3,500214 (290)
3,500
Compression ratioe
10.8 10.5 10.2
Stroke
Borein (mm)
in (mm)2.83 (72)
3.15 (80)2.95 (75)
3.31 (84)3.53 (89.6)
3.31 (84)
Fuel-injection system Digital electronic Engine-Management System
BMW 325xi, 330xi: an engine performance test is authorized only on a suitable chassis dynamometer.
Engine data

Everything from A to Z
205n
IndexDataTechnologyRepairsCar careControlsOverview
Tire inflation
pressure28,125
Tire pressure
checking28
Tire Pressure Control
(RDC)86,186
Tire pressure
monitoring86,186
Tire Quality Grading126
Tire replacement126,127
Tire rotation127
Tire specifications130
Tire tread125
To switch on the interior
lamps36
Tools158
Torque192
Tow fittings174
Tow starting174
Towing174
Track193
Traction Control System,
refer to DSC80
Transmission65
Transporting children
safely59
Tread depth, tires125
Trip odometer74
Trunk39
Trunk lid, refer to luggage
compartment lid39 Turn signal
indicator23,69,160
bulb replacement160
Turning radius193
Two-way radios124
U
Uniform Tire Quality
Grading126
Used batteries170 V
Vacuum cleaner108
Vacuum cleaner,
connecting108
Vanity mirror52
bulb replacement164
V-belts196
Vehicle battery168,196
Vehicle care
exterior147
interior150
Vehicle Identification
Number (VIN)144
Vehicle immobilizer33
Vehicle painting147
Vehicle storage152 Vehicle weight194
Ventilation92,95,98
draft-free95,102
Vinyl care149
Voice recognition24,25
W

Warning lamp "Please fasten
safety belts"21
Warning lamps20
Warning messages76
Warranty and Service Guide
Booklet145
Washer fluids138
Washer nozzles138
Washer reservoir, filling138
Washing your car146
Water on roadways
deep water117
Waxing, paintwork148
Weights194
Wheel changing165
Wheel rims128
Wheelbase193
Wheels and tires128,130
Width193
Windows, convenience
operation34
Windshield washer nozzle
adjustment138
Windshield washer reservoir,
filling138,195 Windshield washer,
automatic70
Windshield wiper69
Windshield wiper blade
replacement158
Winter operation122
Winter tires128,129
Wiper blade
replacement158
Wiper system69
Work in the engine
compartment134
X
Xenon lamps159,188