24n
Starting1. Switch the unit on, refer to page 10
2. Insert the CD into the CD slot with
the label side up.
Display indication:
If there is already a CD in the CD slot
(CD shown in display):
Start up the playback with
Press repeatedly until "TR" appears in
the display.
Playback begins after a few seconds
from the point of the last interruption.
StoppingThe CD is pushed out of the CD slot
somewhat and the unit switches over to
CD changer or radio
or
switch the unit off, refer to page 10
or
switch to the radio or CD changer with
Press repeatedly until the mode display
switches over to the desired audio
source (radio or CD changer).
The sound output changes directly or
with the CD magazine loaded to
>radio operation, refer to page 15
>CD changer operation, refer to
page 29
NO DISC
The CD slot is empty.
CD ERROR
The CD has been improperly inserted or
is demonstrating a mechanical defect.
Starting and stopping the CD Mode displays
29n
OverviewSettingsReceptionPlayingIndex
Starting and stopping the CD Mode displaysStartingPress this key repeatedly until the
display on the operating display for the
CD changer changes, e.g.:
After a few seconds, playback will
begin at the position where the CD was
last interrupted.
If the CD magazine has been
re-loaded, it will start playing the
lowermost CD, e. g. CD 1, track 1.<
StoppingSwitch the unit off, refer to page 10
or
Switch to radio or CD, press:
until the mode display switches over to
the desired audio source (radio or CD).
The sound output changes when a CD
is inserted to
>CD operation, refer to page 24
>or otherwise to radio operation, refer
to page 15
NO DISC
There is no CD in the CD compartment,
or the CD has been inserted incorrectly.
NO DISCS
The magazine is empty.
NO MAGAZINE
No magazine has been inserted.
CD CHECK
The contents of the CD are currently
being read in.
HIGH TEMP
Operating temperature is too high.
Once normal operating temperature
has been reached again, play will be
automatically resumed.
