37-117
Repair Manual, Suspension, Wheels, Steering, Repair Group 40;
Subframe, removing and installing
Repair Manual, Suspension, Wheels, Steering, Repair Group 44,
Vehicle alignment
- Install bolts of torque converter through opening -A- in engine flange to
the drive plate (turn crankshaft 1/3 rotation each time).
- Insert plug into opening -A- in engine flange.
- Install subframe, observe tightening sequence and alignment with
master hole.
- Only perform vehicle alignment if necessary.- Install transmission supports at left and right with transmission mount
page 37
-125
- Remove bolt -A- after transmission is bolted to engine.
- Apply corrosion protection to contact surface between bolt -A- and oil
pan.
- Bolt on ATF lines page 37
-149
Pa
ge 47 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
37-118
- Bolt drive axles to transmission flanges.
Repair Manual, Suspension, Wheels,
Steering, Repair Group 40
- Bolt driveshaft to transmission flange page
39
-79
, Driveshaft, removing and installing.
- After connecting battery, enter anti-theft code for
radio.
Radio operating manual
- Check adjustment of selector lever cable
page 37
-45
.
- Check gear oil in final drive with transmission
installed page 39
-1 .
- Then check ATF level and top off Page 37
-
133
onward.
- Fully close power windows to stop.
Pa
ge 48 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2
