2001 AUDI A4 lock

01-240

Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
003
1 Brake light
switch -F- activated Brake
- See DTC table, DTC 17087 /
P0703 page 01
-45



not
activated
- - Perform electrical test
page 01
-273


2 Shift lock
solenoid -N110- While
standing in
P, N Brake not
operated P N active
- See DTC table, DTC
18170/P1762 and 18196 /
P1761 page 01
-45


Continue



Brake
activated
P N not
selected - Check shift lock solenoid -
N110-. Perform electrical test
page 01
-273

Pa
ge 17 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-241

Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
003
3 Speed
While driving
1)
km/h
- If necessary, check speedometer
vehicle speed sensor (VSS) -G22-

4 Supply voltage,
terminal 15 While
standing
min.
10.0 V - Perform electrical test page
01
-273



max. 16.0 V
- See DTC table, DTC
18158/P1750 and 18159 / P1751
page 01
-45

1) While driving, a second mechanic is required to read specifications.
Note for display field 3, speed:
Display of the speedometer and values at VAS 5051 or V.A.G 1551 may deviate slightly from each other.
Pa
ge 18 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-242

Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
004




Continue

1 ATF
temperature
While standing with
engine running C
- Perform electrical test page 01
-273
- See DTC table, DTCs 17094 / P0710,
17095 / P0711, 17096 / P0712 and
17097 / P0713 page 01
-45

Notes for ATF temperature:

Temperature of minus 50 C indicates a short circuit to Ground (GND), Temperature of minus 180 C indicates a short circuit to B+ or an open circuit,
Pa
ge 19 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-243

Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
004 2 Selector lever position
(Multi-function Transmission
Range (TR) switch -F125- While
standing P P

Selector
R R
lever
N N Check for agreement with
indication in instrument
cluster
in
D D
- Check display field 3

4 4

3 3

Continue


2 2
Pa
ge 20 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-244

Display
group
number Display
field Description
Test requirements
Spec. value
on
V.A.G1551
display Corrective actions
004
2
1)
Selector lever
position -
(Multi-function
Transmission Range
(TR) switch -F125-) While
standing,
selector lever
between P
and
R
or
R
and
D Z1
- Check multi-function Transmission
Range (TR) switch -F125-. display
group number 004, display field 3
Between positions at
selector lever
mechanism

N
and
D Z2
- Perform electrical test page 01
-
273


D
and
4 Z3
- If necessary adjust selector lever
bowden cable

Continue


4
and
3
or
3
and Z4 Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37, shift mechanism, repairing, selector
lever cable, checking and adjusting
Pa
ge 21 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

2
1) This display field is not displayed until model year 2000 (May 1999)
Note on in-between positions:
When the selector lever is shifted into one of the in-between positions, the Scan Tool indicates "Z1", "Z2", "Z3" or "Z4".
Display in instrument cluster must not indicate a gear selected, i.e. PRND432 is indicated without any particular gear
highlighted.
Pa
ge 22 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-245

Display
group
number Display
field Description
Test requirements
Spec. value
on V.A.G1551
display Corrective actions
004
3 Multi-function
Transmission Range
(TR) switch -F125- While
standing Selector
lever
position
L1 L2 L3 L4 - See DTC table, DTC 17090 /
P0706 page 01
-45


P 1000
- Check multi-function
Transmission Range (TR)
switch -F125-

R 0100
- Perform electrical test page
01
-273


N 1110

D 1011
- If necessary adjust selector
lever bowden cable

4 0111 Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37, shift mechanism, repairing

Continue
3 0001


2 0010
Pa
ge 23 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14

01-246
Notes for display field 3 of display group number 004:

The input signals of the Multi-function Transmission Range (TR) switch -F125- can be checked at the Transmission
Control Module (TCM).

Display field 3: (from left to right)
L 1 L 2 L 3 L 4
Wiring connection to Transmission Control Module
(TCM) -J217- Terminal 36 of -
J217- Terminal 8
of
-J217- Terminal 37 of -
J217- Terminal 9
of
-J217-
Pa
ge 24 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14