VENTILATION - HEATINGIII-1
66
Air intake Keep the air intake grille in front of the windscreen clear
of dead leaves, snow, etc. If a high pressure wash be used, avoid directing the jet of water at the air intake. Air vents The air vents have thumb-wheels to control and direct the
airflow (high-low, left-right). Air circulation Optimum comfort depends on the even distribution of the air in the passenger compartment, both at the front and
at the rear. Air vents in the floor beneath the front seats provide
improved heating to the rear seating area. These ventsmust not be obstructed.
VENTILATION - HEATING67III-1
1 - Air distribution controlAir flow from the front vents. Air flow to the footwells and rear seats. Air flow to the footwells and windscreen and side windows. Distribution of air to the windscreen and the side windows.Demisting Ð De-icing.
2 - Isolation of passenger compartment* Intake of outside air. Optimum position for demisting.
Recycled interior air.
This position prevents the entry of unpleasant odours into the vehicle. It is recommended that the control not be left in the recycling position for longer than necessary. The normal position will provide a continuous fresh air
supply to the passenger compartment and will avoid misting of the windows.
3 - Heater blower control slider. For optimum comfort inside the passenger compartment, this control should not be left in the minimum position.
4 - Temperature control.2
34
1
* According to model or country
TABLE OF FUSES
(According to model or country)95V- 2
Number Rating Functions
F1 20 A Trailer
F2 15 ➟ 20 A Fuel pump
F3 10 A Left dipped beam
F4 10 A Right dipped beam
F5 10 A Diagnostic socket
F6 10 A Electronic injection - Immobiliser
F7 10 A Left hand main beam
F8 10 A Right hand main beam
F9 25 ➟ 40 A Engine cooling
F10 30 A Headlamp washers pump
F11 20 A Additional heating
F12 5 A Headlamp wash timer
F13 15 A Catalytic converter sensor - Air blower
F15 40 A Air blower - Air conditioning
F16 30 ➟ 50 A Engine cooling
MF1 20 A Injection relay
MF2 30 A Injection relay
MF4 60 A ABS ECU
ACCESSORIESVI-6
124
When choosing accessories for your vehicle, you should consult
your dealer. He is in the best position to advise you, as a result of hisproduct knowledge and the close contact maintained with the manu-
facturer.
Accessories, replacement parts
Your vehicle incorporates the most modern technology so as to providethe highest levels of active and pas-
sive security. It is important that these qualities are retained and that the characte-ristics of the vehicle are not altered. Advice Use only accessories and replace- ment parts approved by the manu-facturer for your vehicle. These accessories and replace- ment parts are designed specifical-ly for your vehicle and have beentested and approved for reliability
and safety. The manufacturer can-not provide this assurance for anyother products.
A large range of genuine approved and guaranteed accessories is availablefrom our dealer network:
- Security
: Glass etching, alarms, wheel bolt locks.
- Protection : Seat covers, carpets.
- Communication : Radio-telephone, radio/cassette, CD changer, CB.
- Customising : Body styling, spoilers, interior wood finishers,
wooden steering wheel, leather, etc.
- Comfort : Air conditioning, additional heating, sun roof,
storage, etc.
- Leisure : Tow bar, roof bars, ski carrier etc.
- Children : Child restraints, sun blinds, etc.
- Maintenance : Screenwash fluid, engine coolant, cleaning products
for interior and exterior.
