DESCRIPTION
2-2
2
Right view12. Tail/brake light (page 6-30)
13. Passenger seat (page 3-14)
14. Coolant reservoir tank (page 6-11)
15. Rider seat (page 3-13)
16. Rear shock absorber spring preload
adjusting ring (page 3-17)
17. Fuel tank (page 3-11)
18. Front fork spring preload adjusting bolt (page 3-15)19. Front fork rebound damping force
adjusting screw (page 3-16)
20. Headlight (page 6-29)
21. Rear brake pedal (page 3-11)
22. Rear shock absorber rebound damping
force adjusting knob (page 3-18)
23. Rear brake fluid level check window
E_4sv_Description.fm Page 2 Tuesday, August 31, 1999 3:41 PM
PERIODIC MAINTENANCE AND MINOR REPAIR
6-9
6
EAU01765*
Engine oilOil level inspection
1. Place the motorcycle on a level
place and hold it in an upright posi-
tion. Warm up the engine for seve-
ral minutes.NOTE:@ Be sure the motorcycle is positioned
straight up when checking the oil level.
A slight tilt toward the side can result in
false readings. @
2. With the engine stopped, check
the oil level through the level win-
dow located at the lower part of
the right side crankcase cover.NOTE:@ Wait a few minutes until the oil level
settles before checking. @3. The oil level should be between
maximum and minimum marks. If
the level is low, fill the engine with
sufficient oil to reach the specified
level.Engine oil and oil filter cartridge re-
placement
1. Remove cowling A. (See page 6-5
for removal and installation proce-
dures.)
2. Warm up the engine for several
minutes.
3. Stop the engine. Place an oil pan
under the engine and remove the
oil filler cap.
4. Remove the drain bolt and drain
the oil.
1. Oil level window
2. Maximum level mark
3. Minimum level mark
1. Engine oil filler cap
1. Engine oil drain boltLeft side view
E_4sv_Periodic.fm Page 9 Tuesday, August 31, 1999 3:45 PM
