PERIODIC MAINTENANCE AND MINOR REPAIR
6-8
6 2. With the engine stopped, check
the oil level through the level win-
dow located at the lower part of
the right side crankcase cover.
NOTE:@ Wait a few minutes until the oil level
settles before checking. @3. The oil level should be between
the maximum and minimum level
marks. If the level is low, add suffi-
cient oil to raise it to the specified
level.Engine oil and oil filter element re-
placement
1. Warm up the engine for several
minutes.
2. Stop the engine. Place an oil pan
under the engine and remove the
oil filler cap.
3. Remove the drain bolt and drain
the oil.4. Remove the oil filter drain screw,
filter cover bolt, filter cover, oil filter
element and O-ring.
5. Reinstall the drain bolt and tighten
it to the specified torque.1. Oil level window
2. Maximum level mark
3. Minimum level mark
1. Engine oil drain bolt
1. Oil filter drain screw
2. Oil filter cover boltTightening torque:
Drain bolt:
43 Nm (4.3 m·kg)
