2000 YAMAHA XJ600S seat adjustment

R
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3TOC.-
Main switch ......................................................... 3-1
Steering lock (for XJ600N) ................................ 3-3
Indicator lights .................................................... 3-3
Oil level indicator circuit check ........................... 3-5
Speedometer (for XJ600S) ................................. 3-6
Speedometer (for XJ600N) ................................ 3-6
Tachometer ........................................................ 3-7
Handlebar switches ............................................ 3-7
Clutch lever ........................................................ 3-9
Shift pedal ........................................................ 3-10
Front brake lever .............................................. 3-10
Rear brake pedal .............................................. 3-11Fuel tank cap .................................................... 3-11
Fuel ................................................................... 3-12
Fuel tank breather hose (for Germany only) ..... 3-12
Fuel cock........................................................... 3-13
Starter (choke) Ò Ó ......................................... 3-14
Seat................................................................... 3-14
Helmet holders .................................................. 3-15
Storage compartment ....................................... 3-15
Rear shock absorber adjustment ...................... 3-15
Luggage strap holders ...................................... 3-16
Sidestand .......................................................... 3-17
Sidestand/clutch switch operation check .......... 3-17

L
3-15
INSTRUMENT AND CONTROL FUNCTIONS
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-3.frame
1. Helmet holder (´ 2)
EAU02936
Helmet holders
The helmet holders are under the seat.
Remove the seat and hook the helmets
on the helmet holders. Then, install the
seat and lock it.
EWA00022
Never ride with helmets in the hel-
met holders. The helmets may hit
objects, causing loss of control and
possibly an accident.
1. Strap for U-LOCK (´ 2)
EAU01688
Storage compartment
This compartment is designed to store
a genuine Yamaha U-LOCK. (Other
locks may not fit.)
Be sure the lock is fastened securely
with the straps when storing it in the
compartment.
To prevent losing the straps, be sure to
secure them even when a U-LOCK is
not being stored in the compartment.
When storing this OwnerÕs manual or
other documents in the compartment,
be sure to put them in a vinyl bag so
they do not get wet. When washing the
motorcycle, be careful not to flood this
compartment with water.
1. Spring preload adjusting ring
2. Position indicator
EAU00295
Rear shock absorber
adjustment
This shock absorber is equipped with a
spring preload adjusting ring. Adjust
spring preload as follows. Turn the ad-
justing ring in direction a
to increase
spring preload and in direction b
to de-
crease spring preload. Make sure that
the appropriate notch in the adjusting
ring is aligned with the position indica-
tor on the rear shock absorber.

L
6-11
PERIODIC MAINTENANCE AND MINOR REPAIR
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/E-6.frame
1. Screw (´ 4)
5. Remove the air filter case cover by
removing the screws.
6. Pull out the air filter.7. Tap the air filter lightly to remove
most of the dust and dirt. Blow out
the remaining dirt with com-
pressed air as shown. If the air fil-
ter is damaged, replace it.
8. Reassemble by reversing the re-
moval procedure.
EC000082
CAUTION:
lMake sure the air filter is prop-
erly seated in the air filter case.
lThe engine should never be run
without the air filter installed.
Excessive piston and/or cylin-
der wear may result.
EAU00630
Carburetor adjustment
The carburetors are important parts of
the engine and require very sophisti-
cated adjustment. Most adjustments
should be left to a Yamaha dealer who
has the professional knowledge and
experience to do so. However, the idle
speed may be adjusted by the owner
as part of routine maintenance.
EC000095
CAUTION:
The carburetors were set at the
Yamaha factory after many tests. If
they are changed, poor engine per-
formance and damage may result.

R
INDEX
/Net/layout8/layout_G2/work/Imai_work/OM-PS/AA9156_XJ600SN-E6/English/EEIX.frame
O
Oil level indicator circuit check .............. 3-5
Oil level indicator light ............................ 3-3
P
Panel A .................................................. 6-5
Panel removal and installation ............... 6-5
Parking .................................................. 5-6
Pass switch ............................................ 3-7
Periodic maintenance and lubrication .... 6-2
Pre-operation check list ......................... 4-1
R
Rear brake pedal ................................. 3-11
Rear brake pedal height adjustment .... 6-17
Rear shock absorber adjustment ......... 3-15
Rear suspension lubrication ................ 6-23
Rear wheel installation ........................ 6-34
Rear wheel removal ............................. 6-33
Recommended shift points
(for Switzerland only) .......................... 5-5
Right view (XJ600N) .............................. 2-5
Right view (XJ600S) .............................. 2-2
S
Seat ..................................................... 3-14
Shift pedal ............................................ 3-10
Shifting ................................................... 5-4
Sidestand ............................................. 3-17
Sidestand/clutch switch operation
check ................................................. 3-17
Spark plug inspection ............................ 6-6
Specifications ......................................... 8-1
Speedometer (for XJ600N) .................... 3-6
Speedometer (for XJ600S) .................... 3-6
Start switch ............................................ 3-9
Starter (choke) Ò Ó ............................ 3-14
Starting a warm engine .......................... 5-4
Starting the engine ................................. 5-1
Steering inspection .............................. 6-24
Steering lock (for XJ600N) ..................... 3-3
Storage ................................................... 7-4
Storage compartment .......................... 3-15
T
Tachometer ............................................ 3-7
Throttle cable and grip lubrication ........ 6-22
Throttle cable free play inspection ....... 6-12
Tips for reducing fuel consumption ........ 5-5
Tires ..................................................... 6-13
Tool kit ................................................... 6-1
Troubleshooting ................................... 6-34
Troubleshooting chart .......................... 6-35
Turn indicator lights ............................... 3-3
Turn signal switch .................................. 3-8
V
Valve clearance adjustment ................. 6-13
Vehicle identification number ................. 9-2
W
Wheel bearings .................................... 6-25
Wheels ................................................. 6-15