6-26
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
56
7
8
9
EC000096
cCToo little chain slack will overload
the engine and other vital parts.
Keep the slack within the specified
limits.3.Tighten the wheel axle nut to the
specified torque.
EAU01533*
Drive chain slack adjustment1.Loosen the wheel axle nut.
2.To tighten the chain, turn the
chain adjusting plates in direction
a. To loosen the chain, turn the
chain adjusting plates in direction
band push the wheel forward.
Turn each chain adjusting plate
to exactly the same position to
maintain correct axle alignment.
a b
2
1
1.Wheel axle nut
2.Chain adjusting plate
Tightening torque:
Wheel axle nut:
90 Nm (9.0 m
0kg)
EAU03006
Drive chain lubricationThe chain consists of many parts
which work with each other. If the
chain is not maintained properly, it
will wear out quickly. Therefore, the
chain must be serviced regularly.
This service is especially necessary
when riding in dusty areas. This
motorcycle is equipped with a sealed
type chain. Steam cleaning, high-
pressure washers, and solvents can
damage the drive chain, so do not
use these for cleaning it. Use only
kerosene to clean the drive chain.
Wipe it dry, and thoroughly lubricate it
with SAE 30 ~ 50W motor oil. Do not
use any other lubricants on the drive
chain. They may contain solvents
that could damage the sealed chain.
3MB-9-E7 12/27/00 2:52 PM Page 62
