2000 VOLKSWAGEN GOLF anti-theft

Mount the
-see the
the
wrench, if nec­
essary, using your foot. Make sure you are
standing
about one turn.
Do not yet remove the
To remove the anti-theft see the in­
formation on page 77.
jack:
There is
one at the front and one impression at the back under the body to show you where to position the jack -see
arrows in
the jack di­
cut­
out. The rear impression in
cut­
out.
74 -----------------WHAT I

Otherwise, in an accident or sudden maneuver
they
AND
Anti-theft wheel bolts*
Anti-theft
1 - Wheel bolt
2 - Wheel bolt adapter .
B45-329C
(T he adapter is located in the tool kit).
Loosening or tightening a
the adapter 2 all the way over the bolt
1.
Slide the lug wrench from the tool kit onto
the adapter
2 until it stops. The w heel bolt
can now be loosened or tight ened.
A
fter c hanging the wheel, pull the adapter
off the whee l bolt.
We recomme nd you alway s carry th e
a dapt er for th e wheel bolt in the vehicle -
t he best would be in th e to ol
kit.
The code number for the wheel bolt safety devi ce is stamped on the front s ide of the
adapter .
ing the code number .
WHAT NOW? ------------------77

A 8
ABS (Anti-Lock Brakes) 9 Battery 47
Accessor ies, -What do
if
- Brake 46
-Engine
washer 52
accesso ries
52
Anti-Lock Brakes
-
How they work? 9
-Warning
a v ibration on the
brake
9
A nti-Lock Brakes (ABS) 9
11
switch it off? 1 1
Anti-theft
24
48
51
-How often 49
-How often
49
in format ion to k now befo re you disconnect
the batte ry! 51
- Locat ion 48
-Precau tions 47
51
-Winter op erat ion
27
B rake booste r
45
-How often the brake
46
-Wha t is the correct brake
45
-What kind of brake
45

PREMIUM SYSTEM
im­
po rtant informat ion regarding traffic up­
dates,
road conditions, weather reports,
etc .
But remember, you
For
set the of your radio
system so tha t yo u can hear from
other d
rivers at any time.
Anti-theft coding
The anti-thef t coding
it can then be
operated again after entering the correct
code -see page 19.
The radio code number and the radio
contents at the beginning of this struction
is very important that you detach this
changer *.
The
compa rtment. by
the radio unit. The magazine
in the MERKER for further tion.
option, or your
authorized can
if this
option is for your
4 - ---------------/IMPORTANT INFORMATION

PREMIUM
Anti-theft coding
When the unit is turned off and the ignition
key is remo ved from the ignitio n switch, the
flashing
LED indicates that the radio is
equipped with
an anti-theft coding system. the Radio
Canceling the
Perform the steps in
Turn on the radio .
After 3 seconds, the number 1 will
appear in the display.
Use the radio station preset buttons 1 to
4 to enter the code number found on your Radio
ton 2 to en ter the second digit, etc. The ue range for each of the 4 digits is ...
After you finish entering the press
either the upper
you've entered the code number rectly,

Wrong code number
can repeat the procedure again one time. The number of attempts
be disabled for about 1 hour.
Leave the unit
is ....
-2 attempts
- one hour locked .
Note
-----------HOW THE ANTI-THEFT

A
Adjusting
. . . . . . . . 5
..................... 5
AM button ..................... 6
Antenna,-How to take care of . . 21
Anti-Theft protection . . . . . . . . . . . . 22
Anti-theft
do if
up
. . . . . . . . . . . . . . . . . 6
Bands received . . . . . . . . . . . . . . . . 22
-AM ............ ............. 6
(Autostore) . . . . . . . . . . . . . . . 7
..................... 6
-Bass .................... ... 6
... ................... 13
Noise Reduction . . . . . .
.....................
-Fader ....................... 6
- FM ............... .......... 6
-
.................... 5
- Radio station preset . . . . . . . . . .
8
..................... 11
- SEEK ...................... 11
-TAPE ....... ................ 6
-TAPEA/TAPEB ............
-Tone settings . . . . . . . . . . . . . . . . 6
- Track a ......................... 14
hous ing . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . 1
-bay . . . . . . . . . . . . . . . 1
cassette tracks . . . . 1
-Ejecting a cassette . . . . . . . . . . 1
-Fast forward . . . . . . . . . . . . . . . 11
- Fast forward to the next track 11
- Fast reverse . . . . . . . . . . . . . . . . 11
- Fast
rewind to the previous track
11
-How can which side of my
cassette tape is being
-How do switch from one side of
a tape to the other? . . . . . . . . . . .
-function . . . . . . . . . . . . . . 11
-Tape A

SYSTEM
Anti-Theft Coding
When the unit is turned off and the ignitio n
key is removed from the ignition switch, the
flashing
LED
fo r the code.
Convenience radio coding
For technical reasons. the conve nience
radio coding is not
vehicle
mode ls.
the past one had to recode the radio man­
changed with the new conveni ­
ence radio coding function:
then synchronise itself with
the current supply has been interrupted
the radio
automatically che ck to see if it
is
in it is happy , the radio
is therefore no longer necessary to disen ­
gage the electronic
the radio has been fitted to ano ther however, the electronic have
t o be dise ngaged
This code number, together with the
unit's at the front of this instruction next to the con­tacts.
-never keep it in the
Turn o n the radio. appear in
the display.
After 3 seconds, the number 1 appear in the disp lay.
Use the radio station preset buttons 1 to
4 to enter the code number found on you r Radio Use preset button 1 to ente r
t h e first digit in the code numbe r. Use but­
to n 2 to enter th e second digit, etc.
The
ue range for each of the 4 digits is ... The digit
After you finish entering the press
t he right
for longer than 2 seconds until you hear an audib le