2000 TOYOTA 4RUNNER air condition

1442000 4Runner (OM35762U)
1. Air Intake Selector
2. Windshield Air Flow Button
3. A/Cº Button
4. Fan Speed Selector
5. OFFº Button
6. MODEº Button (air flow selector)
7. Temperature Selector
8. AUTOº Button
Automatic air conditioning systemÐ
ÐControls
ProCarManuals.com

1452000 4Runner (OM35762U)
AUTOº button
For automatic operation of the air condi-
tioning, press the AUTOº button. An indi-
cator light will illuminate to show that the
automatic operation mode has been se-
lected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed, air flow and air intake according to
the temperature.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the OFFº button.
Fan speed selector
Turn the knob to adjust the fan speed.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode.
Temperature selector
Turn the knob to adjust the temperatu-
reÐto the right to warm, to the left to
cool.
OFFº button
Push the button to turn off the air condi-
tioning system.
Air flow selector, MODEº button
Press the button to select the vents used
for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. PanelÐAir flows mainly from the
instrument panel vents.
2. Bi- levelÐAir flows from both the floor
vents and the instrument panel vents.
3. FloorÐAir flows mainly from the floor
vents.
4. Floor/WindshieldÐAir flows mainly
from the floor vents and windshield
vents.For details about air flow selector settings,
see the illustration after A/Cº button.
ProCarManuals.com

1462000 4Runner (OM35762U)
Windshield air flow button
When this button is pressed, air flows
mainly from the windshield vents.
Pressing the button once again returns the
air flow mode to the last one used.
Pressing the windshield air flow button
turns on the defroster- linked air condition-
ing. At this time, the A/Cº button indicator
comes on regardless of whether or not the
A/Cº button is pressed in. This is to
clean up the front view more quickly.
When the A/Cº button is not pressed in.
pressing anther air flow button turns off
the air conditioning.
For details about air flow selector settings,
see the illustration after A/Cº button.Air intake selector
Press the button to select the air source.
In automatic operation, you do not have
to select the air intake unless you desire
another air intake mode.
1. RecirculateÐRecirculates the air inside
the vehicle.
2. FreshÐDraws outside air into the sys-
tem.A/Cº button
To turn on the air conditioning, press the
A/Cº button. The A/Cº button indicator
will come on. To turn the air conditioning
off, press the button again.
If the A/Cº button indicator flashes, there
is a problem in the air conditioning system
and the air conditioning automatically
shuts off. If this happens, take your ve-
hicle to a Toyota dealer for service.
ProCarManuals.com

1472000 4Runner (OM35762U)
ÐOperating tips

To cool off your Toyota after it has
been parked in the hot sun, drive with
the windows open for a few minutes.
This vents the hot air, allowing the air
conditioning to cool the interior more
quickly.

Make sure the air intake grilles in front
of the windshield are not blocked (by
leaves or snow, for example).

On humid days, do not blow cold air
on the windshield. The windshield could
fog up because of the difference in air
temperature on the inside and outside
of the windshield.

Keep the area under the front seats
clear to allow air to circulate through-
out the vehicle.

On cold days, push the fan speed se-
lector to adjust the fan speed high for
a minute to help clear the intake ducts
of snow or moisture. This can reduce
the amount of fogging on the windows.

When driving on dusty roads, close all
windows. If dust thrown up by the ve-
hicle is still drawn into the vehicle after
closing the windows, it is recommended
that the air intake selector be set to
FRESH and the fan speed selector to
any setting except OFFº.
ÐAir flow selector settings
ProCarManuals.com

1482000 4Runner (OM35762U)

If following another vehicle on a dusty
road, or driving in windy and dusty
conditions, it is recommended that the
air intake selector be temporarily set to
RECIRCULATE, which will close off the
outside passage and prevent outside
air and dust from entering the vehicle
interior.Heating
For best results, set controls to:
ÐFor automatic operation
Press in the AUTOº button.
TemperatureÐTo the desired
temperature
Air conditioningÐOFF
ÐFor manual operation
Fan speedÐTo the desired fan speed
TemperatureÐTo w a r d s WARM
(to the right)
Air intakeÐFRESH (outside air)
Air flowÐFLOOR
Air conditioningÐOFF

For quick heating, select recirculated
air for a few minutes. To keep the
windows from fogging, select fresh af-
ter the vehicle interior has been
warmed.

Press the A/Cº button on for dehumidi-
fied heating.

Choose floor/windshield air flow to heat
the vehicle interior while defrosting or
defogging the windshield.Air conditioning
For best results, set controls to:
ÐFor automatic operation
Press in the AUTOº button.
TemperatureÐTo the desired
temperature
Air conditioningÐON
ÐFor manual operation
Fan speedÐTo the desired fan speed
TemperatureÐTo w a r d s COLD
(to the left)
Air intakeÐFRESH (outside air)
Air flowÐPANEL
Air conditioningÐON

For quick cooling, select recirculated
air for a few minutes.
ProCarManuals.com

1492000 4Runner (OM35762U)
Ventilation
For best results, set controls to:
ÐFor automatic operation
Press in the AUTOº button.
TemperatureÐTo w a r d s COLD
(to the left)
Air conditioningÐOFF
ÐFor manual operation
Fan speedÐTo the desired fan speed
TemperatureÐTo w a r d s COLD
(to the left)
Air intakeÐFRESH (outside air)
Air flowÐPANEL
Air conditioningÐOFF
Defogging and defrosting
The inside of the windshield
For best results, set controls to:
ÐFor automatic operation
TemperatureÐTo w a r d s WARM
(to the right) to heat;
COLD (to the left)
to cool
Air intakeÐFRESH (outside air)
Air flowÐWINDSHIELD
ÐFor manual operation
Fan speedÐTo the desired fan speed
TemperatureÐTo w a r d s WARM
(to the right) to heat;
COLD (to the left)
to cool
Air intakeÐFRESH (outside air)
Air flowÐWINDSHIELD
Pressing the windshield button turns on
the defroster- linked air conditioning and
the FRESH mode is automatically set.
This setting clears the front view more
quickly.At this time, the A/Cº button indicator
comes on regardless of whether the A/Cº
button is pressed in or not.
If you want to return the setting to RE-
CIRCULATE mode, press the air intake
selector button once again.
When the A/Cº button is not pressed in,
pressing another air flow button turns off
the air conditioning.
To turn off the air conditioning alone,
press the A/Cº button once again.

On humid days, do not blow cold air
on the windshieldÐthe difference be-
tween the outside and inside tempera-
tures could make the fogging worse.
ProCarManuals.com

1502000 4Runner (OM35762U)
The outside of the windshield
For best results, set controls to:
ÐFor automatic operation
TemperatureÐTo w a r d s WARM
(to the right)
Air intakeÐFRESH (outside air)
Air flowÐWINDSHIELD
ÐFor manual operation
Fan speedÐTo the desired fan speed
TemperatureÐTo w a r d s WARM
(to the right)
Air intakeÐFRESH (outside air)
Air flowÐWINDSHIELD
Pressing the windshield button turns on
the defroster- linked air conditioning. At
this time, the A/Cº button indicator comes
on regardless of whether the A/Cº button
is pressed in or not. This setting clears
the front view more quickly.
When the A/Cº button is not pressed in,
pressing another air flow button turns off
the air conditioning.
To turn off the air conditioner alone, press
the A/Cº button once again.

To heat the vehicle interior while de-
frosting the windshield, choose
floor/windshield air flow.
Instrument panel vents
Side vents
Lower vent
If air flow control is not satisfactory, check
the instrument panel vents. The instrument
panel vents may be opened or closed as
shown.
ProCarManuals.com

1542000 4Runner (OM35762U)
Clock
The digital clock indicates the time.
The key must be in the ACCº or ONº
position.
To reset the hour: Push the Hº button.
To reset the minutes: Push the Mº button.
If quick adjustment to a full hour is de-
sired, push the :00º button.
For example, if the :00º button is de-
pressed when the time is between
1:01Ð1:29, the time will change to 1:00.
If the time is between 1:30Ð1:59, the
time will change to 2:00.If the electrical power source has been
disconnected from the clock, the time dis-
play will automatically be set to 1:00 (one
o'clock).
When the instrument panel lights are
turned on, the brightness of the time in-
dication will be reduced.
Thermometer
The thermometer indicates the outside
air temperature when you push the
OUT/Tº button.
The key must be in the ONº position.
Pushing the button once again or turning
the temperature selector will turn off the
display.
When the air conditioning system is on,
pushing the button once indicates the out-
side temperature and a second time
changes the display back to the air condi-
tioning temperature.
Also, turning the temperature selector
while the outside temperature is indicated
changes the display to the air conditioning
temperature.
ProCarManuals.com