2000 SUBARU OUTBACK CD player

5-42n
When CD is in the player
When the “ /❚❚ ” b utton 6 is p ressed , the p layer will start p layb ac k.
NOTE After the last song finishes, the player will automatically return to track 1 (the first song on the disc). To stop playback of a CD
When the “ /❚❚ ” b utton 6 is p ressed d uring p layb ac k of a CD, the
CD stop s p laying temp orarily. To let the CD resume p laying , p ress the
b utton ag ain. To select a song from its beginning
n Forward direction
Briefly p ress the “ ❚” b utton 5 to skip to the b eg inning of the next
trac k. Eac h time the b utton is p ressed , the ind ic at ed trac k numb er will
inc rease. n Backward direction
Briefly p ress the “❚ ” b utton 7 to skip to the b eg inning of the c ur-
rent trac k. Eac h time the b utton is p ressed , the in d ic ated truc k num-
b er will d ec rease. Fast forwarding and fast reverse
n Fast forward
Press the “ ❚” b utton 5 c ontinuously for more than 0.5 sec ond to
fast forward the d isc .
Release the b utton to stop fast forward ing . n Fast reverse
Press the “❚ ” b utton
7 c ontinuously for more than 0.5 sec ond to
fast reverse the d isc .
Release the b utton to stop fast reverse. Repeat playback
Use this to p lay a c ertain trac k rep eated ly. During p layb ac k, p ress the
“ RPT/RDM ” b utton
2 and release it in less than 2 sec ond s. The “RPT ”
ind ic ator will c ome on and the song will b e p layed c ontinuously. To

Audio5-43
–
CONTINUED –
c anc el the rep eat mod e, p ress the b utton ag ain. The
n the “RPT ” ind i-
c ator g oes out, and normal p layb ac k mod e is restore d .
Random playback
Use this to p lay the trac ks on the d isc in rand om o rd er. During p lay-
b ac k, p ress the “RPT/RDM ” b utton
2 and hold it in for more than 2
sec ond s. The “RDM ” ind ic ator will c ome on and all song s on the d isc
will b e p layed in a rand om ord er.
To c anc el the rand om mod e, p ress the b utton ag ain. Then the “RDM ”
ind ic ator g oes out, and normal p layb ac k mod e is res tored .
Scan
Press the “SCN/TOP ” b utton
3 and release it in less than 2 sec ond s,
and you c an hear the first 10 sec ond s of eac h trac k to seac h for the
d esired p rog ram. To c ontinue listening to the p rog r am, p ress the
“ SCAN ” b utton ag ain. After all trac ks on the d isc has b ee n sc anned ,
normal p layb ac k mod e is restored . To p
Use this to return to the first trac k on the d isc d uring p layb ac k. Press
the “SCN/TOP ” b utton
3 and hold it in for more than 2 sec ond s. Play-
b ac k returns to the b eg inning of the first trac k on the d isc .
To eject a disc from the player
When a d isc is b eing p layed b ac k or when a d isc is in the p layer,
p ress the ejec t b utton “
”. The d isc will b e ejec ted .
The d isc may b e removed even when the ig nition swit c h is in the
“ LOCK ” p osition.
NOTE Avoid driving the vehicle with a CD sticking out, because
vibration might make it fall out. To protect the disc, the disc is automatically loaded if it is left
in the ejected position for more than approximately 15 seconds(Auto Reload). In this case, the disc is not played.

5-44In-dash 6 CD auto changer (if equipped)
HB5040BB
1 Disc slot
2 Disc ind ic ators (d isc No.1 to 6) 3
Disc selec t b uttons
(d isc No.1 to 6)
4 Ejec t b utton
CAUTION
Do not attempt to insert two or more discs into the slot at a
time. Doing so can cause mechanical damage to the CD changer. Use only music CDs identified by a
mark.
Do not use CDs listed below which could cause damage to the
CD player.
3-inch (8 cm) compact disc.
Any disc with a peel-off or seal on it.
Any disc with scratches and/or dust.
Bent disc.
Cleaning disc.
CD accessory. (E.g., 3-inch (8 cm) disc adapter)
Do not insert or remove any disc when the automatic transmis-
sion selector lever is in the park position; the selector lever in that position can interfere with disc insertion or removal, causing
scratches on the disc surface (for AT vehicles).