Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 9 02
♦It is absolutely necessary to observe the oil disposal
instructions!
♦It is not permitted to clean and re-use the oil filter!
–Remove oil filler cap.
–Remove the noise insulation.
–Screw out the oil drain plug and collect the oil in a suit-
able vessel.
–Clean the drain plug, screw in with a new seal and
tighten to the specified tightening torque:
Engine-oil pan: 30 Nm
–Pour in oil as stated in the specifications.
Engine oil capacities:
♦with oil filter change approx.:
2.4 litres (1.2 litre/40 kW - engine)
2.8 litres (1.2 litre/47 kW - engine)
3.2 litre (1.4 litre/55 kW (petrol) and 1.4 litre/74kW - en-
gine)
4.0 litre (1.0 litre/37 kW, 1.4 litre/44 kW, 1.4 litre/50 kW
and 2.0 litre/85 kW engine)
4.2 litre (1.4 litre/55 kW TDI PD - engine)
4.3 litre (1.9 litre/47 kW SDI, 1.9 litre/74 kW TDI PD and
1.9 litre/96 kW TDI PD - engine)
The engine is factory-filled with quality multigrade oil,
which can also be used as an all-season oil, except in ex-
tremely cold climatic zones.
Specification for petrol engines:
The given specifications must be indicated on the can in-
dividually or together with other specifications.
Only use engine oils:
QGO, QG2
Standard: VW 500 00, VW 501 01 or VW 502 00
Oils may be intermixed when topping up.
In exceptional cases:
Multigrade oils according to ACEA A2 or A3. Such oils
must only be used once for topping up within the speci-
fied oil change interval if, in exceptional cases, no ap-
proved engine oil is available.
QG1
Specification VW 503 00
Specification for diesel engines:
The given specifications must be indicated on the can in-
dividually or together with other specifications.
Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 18 02
Replace air filter element
–Open the filter housing.
–Replace the filter element and clean the filter housing.
–Close filter housing and check correct fitting.
Replacing the fuel filter (diesel engine)
♦Make sure no diesel fuel comes into contact with the
coolant hoses. If necessary clean the hoses immedi-
ately!
♦It is absolutely necessary to observe the oil disposal
instructions!
♦Observe the disposal instructions!
Removing
–Remove retaining clips -3-.
–Remove regulating valve -4- with the connected fuel
hoses.
–Remove fuel hoses -1- and -2- on the filter.Engine fitted Spark plug manufac-
turer's designationParts No. Electrode spacing
1.0 litre/37 kW NGK BKR 6ETA-10 101 000 065
AA1.0 mm
1)
1) Distance between earth electrode and spark plug insulator.
1.2 ltr./40 kW AWY NGK PZFR5J-11 101 905 600
1.0 mm1)
NGK ZFR 5P-G 101 905 617
0.9 mm1)
BOSCH F7 HER2 101 905 601 B
0.9 mm1)
BMD NGK ZFR 5P-G 101 905 617
0.9 mm1)
BOSCH F7 HER2 101 905 601 B
0.9 mm1)
Brisk DOX 15 LE 101 905 618
0.9 mm1)
1.2 ltr./47 kW BOSCH F7 HER2 101 905 601 B
0.9 mm1)
NGK ZFR5P-G 101 905 617
0,8 mm1)
1.4 ltr./44 kW Brisk DR 15 TC 101 000 060
AA0,8 mm1)
1.4 ltr./50 kW Champion RC-89 PYC 101 000 049
AC0.8 mm1)
1.4 ltr./55 kW AUA, BBY NGK BKUR 6ET-10 101 000 033
AA1.0 mm1)
BKY BERU 14F-7 HUR 2 101 905 603 B
0.9 mm1)
1.4 ltr./74 kW NGK BKUR 6ET-10 101 000 033
AA1.0 mm1)
2.0 ltr./85 kW NGK BKUR 6ET-10 101 000 033
AA1.0 mm1)
Note
1
2
3
4
S02-0323
Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 19 02
–Unlock hooks -arrows-.
–Loosen the fuel filter and remove.
Installing
–Install new fuel filter.
–Lock hooks -arrows-.
–Fit the new O-ring for the regulating valve.
–Install regulating valve -4- with the connected fuel
hoses.
–Attach retaining clips -3-.
–Install the fuel hoses -1- and -2- and secure with hose
clamps.
The direction of flow is indicated with arrows (do not
switch connections).
–Inspect the fuel system for tightness (visual inspec-
tion).
Draining the fuel filter (diesel engine)
♦Make sure no diesel fuel comes into contact with the
coolant hoses. If necessary clean the hoses immedi-
ately!
♦Collect fuel in a suitable vessel!
♦It is absolutely necessary to observe the oil disposal
instructions!
–Remove retaining clip -2- and remove regulating valve
-1- with the connected fuel hoses.
–Unlock hooks -arrows-.
–Loosen the fuel filter and remove.
Note
Note
S02-0324
1
2
1
2
3
4
S02-0323
