2000 Mercury Mountaineer lock

[x] Cancel search: lock

Page 42 of 264

Mercury Mountaineer 2000  Owners Manuals When in clock mode, the media information will display for 10 seconds,
when the radio is turned on, and then revert to clock information.
Anytime that the media is changed, (new radio station, etc.),

Page 51 of 264

Mercury Mountaineer 2000  Owners Manuals Setting the clock
To set the hour, press and hold the
CLK control and press SEEK:
²
to decrease hours and
²
to increase hours.
To set the minute, press and hold
the CLK control and press TUNE:
²
to

Page 52 of 264

Mercury Mountaineer 2000  Owners Manuals The CLK button will allow you to
switch between media display mode
(radio station, stereo information,
etc.) and clock display mode (time).
When in clock mode, the media
information will display for 1

Page 64 of 264

Mercury Mountaineer 2000  Owners Manuals Compression adjust
Compression adjust brings soft and
loud CD passages together for a
more consistent listening level.
Press the COMP control to activate
and deactivate compression adjust.
Shuffle fea

Page 65 of 264

Mercury Mountaineer 2000  Owners Manuals To set the minute, press the
clock/RDS control until SELECT
MIN is displayed and press:
²
to decrease minutes and
²
to increase minutes.
Radio Data System (RDS) feature
This feature allows your audi

Page 73 of 264

Mercury Mountaineer 2000  Owners Manuals 5. Line up the CD with the groove
of the disc holder. Ensure that the
label on the CD faces downwards.
6. Press in on the disc holder until it
locks securely into the magazine. If
the disc holders are

Page 76 of 264

Mercury Mountaineer 2000  Owners Manuals TURN SIGNAL CONTROL
²Push down to activate the left
turn signal.
²Push up to activate the right turn
signal.
POSITIONS OF THE IGNITION
1. ACCESSORY, allows the electrical
accessories such as the rad

Page 81 of 264

Mercury Mountaineer 2000  Owners Manuals TILT STEERING WHEEL
Pull the tilt steering control toward
you to move the steering wheel up
or down. Hold the control while
adjusting the wheel to the desired
position, then release the control to
loc
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 ... 80 next >