2000 MERCEDES-BENZ E430 hood open

287 Exterior lamps
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hintsCar care Index Bulbs for high and low beam
H7 (55 W)
Open hood.
Twist cover (1 or 2) counterclockwise and remove.
Pull off electrical connector (4) or (5).
Twist bulb holder counterclockwise and remove bulb
from it.
Insert the new bulb so that its base fits in recess of the
holder.
Install bulb holder and twist clockwise to its stop, and
reinstall electrical connector.
Reinstall cover (1 or 2), twist it clockwise until seated
securely.
Xenon (optional)
Bulb for low beamBulbs for high beam
H7 (55 W)
Open hood.
Twist cover (2) counterclockwise and remove.
Pull off electrical connector.
Twist bulb holder counterclockwise and remove bulb
from it.
Insert the new bulb so that its base fits in recess of the
holder.
Install bulb holder and twist clockwise to its stop, and
reinstall electrical connector.Ensure that base is
secured on both sides (arrows)
Reinstall cover (2), twist it clockwise until seated
securely.
Wa r n i n g !
Because of high voltage in Xenon lamps, it is
dangerous to replace the bulb or repair the lamp
and its components. We recommend that you have
such work done by a qualified technician.

288 Exterior lamps
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hintsCar care Index
Turn signal lamp
1156 NA (26.9 / 5 W / 32 / 4 cp bulb)
Open hood.
Twist bulb socket (3) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Reinstall lamp assembly until
properly seated.Parking and standing lamp
H 6W (6 W bulb)
Open hood.
Twist cover (2) counterclockwise and remove.
Pull off electrical connector (6).
Twist bulb socket (6) counterclockwise and pull out.
Push bulb into socket, turn counterclockwise and
remove.
Insert new bulb in socket, push in and twist clockwise.
Reinstall bulb socket. Reinstall lamp assembly until
properly seated.

296 Manual release for fuel filler flap
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hintsCar care Index
Manual release for fuel filler flap
The manual release knob is located behind the right
side trunk panel.
In case the central locking system does not release the
fuel filler flap, pull the manual release knob while
simultaneously opening the fuel filler flap.Replacing wiper blade insert
For safety reasons, remove electronic key from steering
lock before replacing the wiper blade, otherwise the
motor can suddenly turn on and cause injury.
Notes:
Do not open engine hood with wiper arm folded forward.
Do not allow the wiper arm to contact the windshield
glass without a wiper blade inserted. The glass may be
scratched or broken.
Make certain that the wiper blade is properly installed.
An improperly installed wiper blade may cause
windshield damage.
P80.20-2090-26

330 Index
Te ch n ica l
data Instruments
and controlsOperation DrivingInstrument
cluster displayPractical hints Car careIndex
Parking lamps ..................................................288, 289
Replacing bulbs .........................................................285
Side marker lamp, front ...........................................290
Standing lamps ................................................. 288, 289
Taillamp assemblies .................................................289
Turn signal lamps ............................................ 288, 289
FFirst aid kit .....................................................................254
Flexible service system (FSS) .......................................114
Four wheel electronic traction system
(4MATIC) with Electronic Stability
Program (ESP) ........................................................... 219
Fuel ..................................................................................229
Gasoline Additives ....................................................322
Premium unleaded gasoline ..................229, 319, 321
Fuel cap placement warning ........................................236
Fuel Requirements ........................................................ 321
Fuel reserve warning ....................................................236
Fuels, coolants, lubricants etc. - capacities ............... 318
Fuses, electrical .............................................................255
GGarage door opener ....................................................... 171
Gasoline
Additives .................................................................... 322
Fuel Requirements ...................................................321
Premium unleaded .................................................. 229
General notes on the
central locking system ............................................... 28
Glove box ......................................................................... 163HHazard warning flasher switch ................................... 125
Head restraints
Front seat .....................................................................52
Rear seat ....................................................................... 53
Synchronizing ............................................................. 48
Headlamp cleaning system ........................................... 121
Headlights ....................................................................... 122
Heated seats ......................................................................55
Hood ................................................................................ 257