Page 79 of 502
GAUGES, METERS AND SERVICE REMINDER INDICATORS
62This meter displays the odometer and two trip
meters. To change the mode indication, push the
ºODO/TRIPº button.
The odometer records the total distance the vehicle
has been driven. The twin trip meter records two
different distances independently.
For example, you can use one meter to calculate the fuel
economy
and the other to measure the distance on each
trip.
To change the trip meter indication from one trip to
the other, push the ºODO/TRIPº button. To set the
A trip meter to zero, display the A meter reading,
then push the ºRESETº button. The same applies
for the B trip meter.
The data of trip meters will be cancelled if the electrical
power source is disconnected.
SERVICE REMINDER
INDICATORS AND WARNING BUZZERS
Page 89 of 502
GAUGES, METERS AND SERVICE REMINDER INDICATORS
72
W24
When the fuel gauge indicates around ºFº
W25W25
When the fuel gauge indicates around middle
W26
When the fuel gauge indicates around ºEº
Available driving distance with the remaining fuel is
calculated and displayed depending on the amount
of remaining fuel.
Average fuel consumption
W27W27
The average fuel consumption is calculated and
displayed based on the total driving distance and
the total fuel consumption with the engine running.
The value is updated every 10 seconds.
To calculate from the beginning, push the ºRESETº
button.Current fuel consumption
W28W28
Page 91 of 502
GAUGES, METERS AND SERVICE REMINDER INDICATORS
74
W30W30
The driving distance after being refueled with more
than 10 L (2.6 gal., 2.2 lmp.gal.) is displayed.
When refueling, be sure to stop your vehicle and turn the
ignition switch off.
Elapsed time
W31W31
The total time during the engine running is
displayed.
When the engine is started again after the ignition is off,
the driving time is added to the previous value. Up to 99
hours 59 minutes can be displayed. When the driving
time exceeds 99 hours 59 minutes, the display returns
to 0 and recounting starts.
To count from the beginning, push the ºRESETº button.
Average vehicle speed
W32W32
The average vehicle speed is calculated and
displayed based on the total driving distance and
the total driving time with the engine running.
The displayed value is updated every 10 seconds.
To calculate from the beginning, push the ºRESETº
button.