2000 Lexus LS400 display

AUDIO
270
20L054a
Push the ºSCANº button until you hear a beep.
With ºD.SCANº on the display, the program at the
beginning of each disc will be played for 10 seconds. To
continue listening to the program of your choice, push
the ºSCANº button a second time.
After all the discs in the magazine are scanned in one
pass, the scan function is cancelled.(f) Selecting a desired track

AUDIO
271
20L100
ºTRACKº button: Use for direct access to a desired
track.
Push either side of the ºTRACKº button several times
until the desired track number appears on the display.
As you release the button, the player will start playing the
selected track from the beginning.
ºFast forwardº button.
Push the º

º button and hold it to fast forward the disc.
When you release the button, the compact disc player
will resume playing from that position.
ºReverseº button.
Push the º º button and hold it to reverse the disc.
When you release the button, the compact disc player
will resume playing. (g) Other compact disc player functions

AUDIO
272
20L055-2
ºRPTº button: Use it for automatic repeat of the track
you are currently listening to.
Push the button while the track is playing. When the
track is finished, the player will automatically go back to
the beginning of the track and play the track again. To
cancel it, push the button once again.
ºRANDº button: Use it for automatic track selection
and play by the system.
When the button is pushed, the system selects a track
in the discs which are set and plays it. To cancel it, push
the button once again.
When a track is skipped or the system is inoperative,
push the button to reset.(h) If the player malfunctions
If ºWAITº appears on the display, audio signals of the
disc
cannot be read or the system has trouble. Push the
ºCDº button once again.
If the player does not operate, check that the disc
surface is not soiled or damaged. If the disc is O.K., the
following two causes are possible.
 Condensation may have occurred on the internal
mechanism of the automatic changer. Open the
cover to let the air circulate.
 The temperature of the player's internal mechanism
is raised because of high external temperature.
Remove the magazine from the player to cool it.
If the player still does not operate, take it to your Lexus
dealer.

STARTING AND DRIVING
291


The shift position is displayed on the instrument
cluster.
P: Parking, engine starting and key removal position
R: Reverse position
N: Neutral position
D: Normal driving position (Shifting into overdrive
possible)
4: Position for engine braking (Shifting into
overdrive not possible)
When the cruise control is being used, even if you
downshift from ºDº to º4º, engine braking will not
be applied because the cruise control is not
cancelled. For the operation to decrease the
vehicle speed, see page 308.
3, 2: Position for more powerful engine braking
L: Position for maximum engine braking Correct use of the automatic transmission is
explained in the following parts.
(a) Normal driving
(b) Using engine braking
(c) Using the º3º, º2º and ºLº positions
(d) Backing up
(e) Parking
(f) Good driving practice
(g) Rocking your vehicle if stuck
(h) If you cannot shift the selector lever

STARTING AND DRIVING
318
Vehicle skid control failure warning
31L073
In the following cases, the warning message
appears and the reminder light next to the warning
message and the ºVSC OFFº indicator light come
on. And the warning tone also sounds.
(a) After the removal of the battery terminals (See ºInitial
adjustment of vehicle skid control systemº described
below.)
(b) If the vehicle skid control system malfunctions
If the message appears, the brake assist system does
not work, however, there is no problem to continue your
driving. If the message appears for the cause of (b),
have your vehicle checked by Lexus dealer as soon as
possible.
Initial adjustment of vehicle skid control system
After the battery terminals are disconnected, an initial
adjustment should be made. At this time, the reminder
light
comes on and the warning message appears in the
multi information display.
Make an initial adjustment in the following ways:
1. Apply the parking brake and put the transmission in
ºPº.
2. Connect the battery terminals.
3. Turn the ignition switch on. At this time, the ºVSC
OFFº i ndicator light comes on and then about 6 seconds
later, the reminder light comes on and the ºCHECK VSCº
warning message appears in the multi information
display.

STARTING AND DRIVING
328
Brake pad wear limit warning message
31L082
When your brake pads are worn enough to require
replacement, the brake pad wear warning message
in the multi information display appears.
If the warning message in the multi information display
appears while driving, have the brake pads checked and
replaced by your nearest Lexus dealer immediately.
Continuous driving without replacing the brake pads will
cause expensive rotor damage and increasing brake
pedal effort to get the same stopping distance.TYPES OF TIRES
Determine what kind of tires your vehicle is originally
equipped with.
1. Summer tires
Summer tires are high±speed capability tires best suited
to highway driving under dry conditions.
Since summer tires do not have the same traction
performance as snow tires, summer tires are
inadequate for driving on snow±covered or icy roads.
For driving on snow±covered or icy roads, we
recommend using snow tires. If installing snow tires, be
sure to replace all four tires.

ENGINE
417
Oil identification marks
62L006±1

API Service Symbol
ILSAC Certification
Mark
Either or both API registered marks are added to some
oil containers to help you select the oil you should use.
 The API Service Symbol is located anywhere on the
outside of the container.
The top portion of the label shows the oil quality by
API (American Petroleum Institute) designation such
as SJ. The center portion of the label shows the SAE
viscosity grade such as SAE 5W±30.
ºEnergy±Conservingº, shown in the lower portion,
indicates that the oil has fuel±saving capabilities.
 The ILSAC (International Lubricant Standardization
and Approval Committee) Certification Mark is
displayed on the front of the container.
CHECKING THE ENGINE
COOLANT LEVEL

ELECTRICAL COMPONENTS
451
20 STOP±S7.5
Shift lock system,
Height control system,
Anti±lock brake system,
Vehicle skid control system
21 RR S/HTR15No circuit
22 WASHER20Windshield washer
No.FUSEAMPERECIRCUIT
23 AIR SUS20Height control system
24 D RR
DOOR20Rear door lock,
Rear power window
25 HORN10Horns
26 ETCS15Electronic throttle control
system
27 H±LP L UPR10Left±hand headlight (high
beam)
28 H±LP R UPR10Right±hand headlight (high
beam)
29 EFI NO.210Emission control system
30 MIR±HTR15Outside rear view mirror
defogger
31 FR S/HTR15Seat heater
32 ALT±S7.5Charging system
33 TEL15Telephone
34 CRT15Multi information display