2000 HONDA PRELUDE maintenance schedule

U.S. Owner s
Follow the Normal Conditions
Maintenance Schedule if the severe driving conditions
specified in the Severe
Conditions Maintenance
Schedule do not apply.
NOTE: If you only
OCCASIONALLY drive under a
"severe" condition, you should
follow the Normal Conditions
Maintenance Schedule.
Canadia n Owner s
Follow the Maintenance Schedule for Severe Conditions.
# : See information on maintenance and emissions warranty, last column, page 171 .
Maintenanc e

Service at the indicated distance or time, whichever comes first. Do the items in A, B , C as required for each distance/time interval. Follow this
schedule if the severe driving conditions described in the Severe Conditions Schedule on the next page do not apply.
Canadia n owners : Follow the schedule for Severe Conditions.
#: See information on maintenance and emissions warranty, lastcolumn, page 171.
Maintenanc e
page 208

# : See information on maintenance and emissions warranty, last column, page 171 .
Maintenance
U.S. Owner s
Follow the Severe Conditions
Maintenance Schedule if you
drive your vehicle MAINLY
under one or more of the
following conditions:
Driving less than 5 miles (8
km) per trip or, in freezing
temperatures, driving less than 10 miles (16 km) per trip.
Driving in extremely hot [over 90°F (32°C)] conditions.
Extensive idling or long
periods of stop-and-go driving.
Trailer towing, driving with a roof rack, or driving in
mountainous conditions.
Driving on muddy, dusty, orde-iced roads.
*1: Refer to page 204 for replacement
information under special driving
conditions.
*2: Refer to page 203 for replacement
information under special driving
conditions.
Canadia n Owner s
Follow the Maintenance
Schedule for Severe Conditions.

Use this schedule if your vehicle is MAINLY driven in any of the following Severe Conditions, or normally driven in Canada; otherwise use the Normal
Schedule. Service at the indicated distance or time, whichever comes first. Do the items in A , B , C as required for each distance/time.
Sever e Conditions :Driving less than 5 miles (8 km) per trip or, in freezing temperatures, driving less than 10 miles (16 km) per trip.Driving in extremely hot (over 90°F/32°C) conditions.Extensive idling or long periods of stop-and-go driving.Trailer towing, driving with a roof top carrier, or driving in mountainous conditions.Driving on muddy, dusty, or de-iced roads.
#: See information on maintenance and emissions warranty, lastcolumn, page 171.
Maintenanc e
CONTINUED
page 208

Required Maintenanc e Recor d (fo r Norma l an d Sever e Schedules )
Maintenanc e
CONTINUED
You or the servicing dealer can record all completed maintenance here, whether you follow the schedule for normal conditions (page 172 ) or severe
conditions (page 174). Keep the receipts for all work done on your vehicle.

Engin
e Oi l
The oil container may also display the API Certification seal. Make sureit says "For Gasoline Engines."
API CERTIFICATIO N SEA L The SAE numbers tell you the oil's
viscosity or weight. Select the oil for
your car according to this chart.
An oil with a viscosity of 5W-30 is preferred for improved fuel economyand year-round protection in your
Honda. You may use a 10W-30 oil if
the temperature in your area never
goes below 20°F (—7°C). Syntheti
c Oi l
You may use a synthetic motor oil if it meets the same requirements
given for conventional motor oil: energy conserving, a service
classification of SJ, and the proper
weight as shown on the chart. When
using synthetic oil, you must follow
the oil and filter change intervals
given in the maintenance schedule.
Additive s
Your Honda does not need any oil additives. Purchasing additives for
the engine or transmission will not
increase your car's performance or
longevity. It only increases the cost of operating your car.

Maintenanc e
Ambien
t Temperatur e

Engin
e Oi l
Changin g th e Oi l an d Filte r
Always change the oil and filter according to the time and distance (miles/kilometers) recommenda-
tions in the maintenance schedule.
The oil and filter collect contami- nants that can damage your engine if
they are not removed regularly.
Changing the oil and filter requires
special tools and access from
underneath the car. The car should
be raised on a service station-type
hydraulic lift for this service. Unless
you have the knowledge and proper equipment, you should have this
maintenance done by a skilled
mechanic.
1. Run the engine until it reaches normal operating temperature,

then shut it off.
2. Open the hood and remove the
engine oil fill cap. Remove the oildrain bolt and washer from the
bottom of the engine. Drain the oil
into an appropriate container. 3. Remove the oil filter and let the
remaining oil drain. A special
wrench (available from your Honda dealer) is required to

remove the filter.

Maintenance
Typ
e S H OI
L FILTE R
OI L DRAI N BOL T
WASHER

CONTINUED

Coolin
g Syste m

Do not add any rust inhibitors or other additives to your car's coolingsystem. They may not be compatible
with the coolant or engine compo-
nents.

Replacin g Engin e Coolan t
The cooling system should be completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use Genuine Honda Antifreeze/Coolant.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance done by a skilled mechanic. 1. Turn the ignition ON (II). Slide
the heater temperature controllever to maximum heat. Turn offthe ignition. Open the hood. Makesure the engine and radiator are
cool to the touch.
2. Remove the radiator cap. 3. Loosen the drain plug on the
bottom of the radiator. Thecoolant will come out through the
hole in the splash cover.

CONTINUED

Maintenanc e
DRAI
N PLU G
Typ e S H