2000 HONDA ODYSSEY mirror

[x] Cancel search: mirror

Page 58 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Instrument
s an d Control s

This section gives information about
 the controls and displays that
contribute to the daily operation of

your Honda. All the essential
 controls are within easy reach.

Page 68 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Controls Nea r th e Steerin g Whee l
The two levers on the steering
column contain controls for driving
features you use most often. The left
lever controls the turn signals,
headlights, and high beam

Page 118 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Mirrors
Keep the inside and outside mirrors
clean and adjusted for best visibility.
Be sure to adjust the mirrors before
you start driving.
The inside mirror has day and night positions. The night pos

Page 119 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Mirrors, Parkin g Brak e
HEATE D  MIRRO R  BUTTO N
Canadian Models
The outside mirrors are heated to re-
move fog and frost. With the ignitionswitch ON (II), turn on the heaters
by pressing the button

Page 124 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual 
Su
n Visor , Vanit y Mirro r

Su n Viso r
To use the sun visor, pull it down. You can also use the sun visor at the side window. Remove the support
rod from the clip and swing the sun
visor toward th

Page 205 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Preparing to  Driv e
You should do the following checks
and adjustments every day before
you drive your vehicle.
1. Make sure all windows, mirrors, and outside lights are clean and
unobstructed. Remov

Page 225 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Towing a  Traile r
Spare Vehicle Tire
When towing a trailer, you should
carry a full-size wheel and tire as a
spare in case you have a flat. If you
use the compact spare tire that came
with the vehicl

Page 281 of 352

HONDA ODYSSEY 2000 RA6-RA9 / 2.G Owners Manual Lights
4. Turn on the parking lights and
check that the new bulb is
working.
5. Put the lens back on the bulbholder and push it until it latches.
6. Slide the left side of the light assembly into the
Page:   1-8 9-16 next >