2000 GMC YUKON Back seat

1-10
To create a load floor, release the panels from the
seatback by pushing forward on the latch. Then fold
the panels back to cover the rear seat footwell area.
To return the seat to the passenger position on a
Suburban/Yukon XL, lift the floor load panels and latch
them into the seatback. Lift the seatback up and push
rearward all the way. Then lower the seat cushion until it
latches into position.Pull forward on the seatback and up on the seat cushion
to make sure the seat is securely in place.
Check to see that the buckles on the driver's side
seatback are accessible to the outboard and center
occupant and are not under the seat cushions.
If you have removed the head restraints to fold the rear
bucket seat, be sure to reinstall them on the seatback
after it has been returned to the normal seating position.
Be sure to return the head restraints to the upright
position on Utility models.

1-11
Entry to the Third Seat
Suburban/Yukon XL: The passenger's side of the
second row 60/40 or rear bucket seats has an easy entry
feature. This makes it easy to get in and out of the third
seat, if your vehicle has one.
To operate the easy entry seat, rotate the release lever,
located near the back of the seat rearward.
Tilt the seatback toward the front of the vehicle by
pulling the top of the seatback forward.
When you do, the seat bottom will release. Just pull the
seat forward until it stops.
Be sure to return the seat to the passenger position when
finished. Pull forward and push rearward on the seat to
make sure it is locked in place.Folding the Third Seat
Utility: The seatback of the third seat (if equipped)
in utility models also folds down on the floor.
To fold the seatback down,
pull up on the release lever
labeled 1 located on the rear
of the seatback, then push
the seatback forward.
To return the seat to the passenger position, pull up
on the release lever labeled 1 and then pull up on the
seatback until it locks into the upright position. Push
forward on the seatback to make sure it is locked
into position.

1-12
If more cargo space is
desired, the third seat can
also be folded and tumbled
forward or removed if
necessary by pulling up on
the release lever labeled 2.
The seat locks into place and does not need to be removed
when carrying cargo. See ªRemoving the Third Row Seats º
for Utility later in this section for removal instructions.
Suburban/Yukon XL: The seatback of the third seat
(if equipped) in Suburban/Yukon XL models also folds
down to create more cargo space.
To fold the seatback down, pull up on the release lever,
labeled 1, located on the rear of the seatback, then push
the seatback forward.To return the seat to the passenger position, pull up on
the release lever and then pull up on the seatback until
it locks into the upright position. Push forward on the
seatback to make sure it is locked into position.
If still more cargo space is desired, the third seat can
also be folded and tumbled forward by using the lever,
labeled 2. To return the seats to their original position,
reverse the above steps.
Fold and Tilt Feature (Suburban/Yukon XL
Third Seat)
Once the third seatback has been folded down, the
entire seat can be tilted forward to create a flat load
floor. To do this, you will need to enter the rear cargo
area of the vehicle. Make sure the head restraints have
been lowered completely.
With the seat folded, unlatch the seat from the floor by
pulling up on the lever located under the carrying handle
at the rear of the seat labeled 2. Lift the rear of the seat
up, off of the floor. You will not be able to unlatch the
seat from the floor unless the seatback is folded down.
Tilt the seat fully forward and secure it in place using
the support rod located on the underside of the seat,
passenger side. Make sure the support rod pin is fully
engaged in the lock.

1-13
Push and pull on the seat, making sure that the support
rod is holding it firmly in place. Use the seat in this
position only when necessary for additional cargo space.
CAUTION:
If the support rod isn't properly engaged, the
folded third row seat could come loose in a
sudden stop or crash. That could cause injury to
people and damage to your vehicle. Always be
sure the support rod is properly engaged when
the third row seat is folded forward.
To return the seat to its seating position, push forward
on the seat and release the support lock rod. Secure the
support rod in its stored position on the underside of the
seat. Lower the seat to the floor and let the seat drop into
place. Lift up on the carrying handle to make sure the
seat is locked in place.
Return the seatback to the upright position by pulling
up on the release lever labeled 1 before the back can be
folded upright. Pull the seatback forward to make sure it
is locked into place.Removing the Third Row Seats
Utility: If your vehicle has third row seating, it can be
taken out for more cargo space.
To remove the seat, fully open the rear doors and enter
the rear of the vehicle.
Fold the seatback forward
into the seat cushion by
using the lever labeled 1.
The seat cannot be
removed unless the
seatback is folded.

1-14
To unlatch the seat from the
back of the floor, pull up on
the release lever labeled 2
at the rear of the seat and
lift the rear of the seat up
from the floor.
Pull on the release lever located in the lower middle to
unlatch the seat from the front of the floor and pull the
seat out. Use one hand on the release lever and the other
on the handle to pull the seat out.
Suburban/Yukon XL: If your vehicle has third row
seating, it can be taken out for more cargo space.
To remove the seat, fully open the rear doors and enter
the rear of the vehicle.Fold the seatback forward into the seat cushion by using
the lever labeled 1. The seat cannot be removed unless
the seatback is folded.
To unlatch the seat from the floor, pull up on the release
lever labeled 2 at the rear of the seat and lift the rear of
the seat up, off of the floor.
Pull on the strap at the rear of the seat to release the
front seat latches. Then, pull the seat straight back,
towards the rear of the vehicle and remove it. There are
wheels at the front of the seat to assist you.
Replacing the Rear Seat (Third Row Seats)
Utility: To put the seat back in, place the front of
the seat on the load floor facing towards the front of
the vehicle. Slide the wheels into the slots on the floor
and lock into place using the hooks there. Once the
latches are engaged pull on lever 3 to let the seat drop
into place. Release the lever labeled 1 to return the seat
to its upright position. Push and pull on the seat to make
sure it is locked into place.

1-15
Suburban/Yukon XL: To put the seat back in,
place the front of the seat on the load floor, facing the
front of the vehicle. While holding the rear of the seat
up use the wheels on the front of the seat to roll it
towards the seat hooks in the floor. When the latches
are engaged in the hooks, let the seat drop into place.
Lift up on the carrying handle to make sure the seat is
locked in place.
Raise the seatback into the upright position. Push and
pull on the seat to make sure it is locked into place.
The seatback cannot be raised to the upright position
unless the seat is secured to the floor.
CAUTION:
A seat that isn't locked into place properly can
move around in a collision or sudden stop. People
in the vehicle could be injured. Be sure to lock
the seat into place properly when installing it.
Safety Belts: They're for Everyone
This part of the manual tells you how to use safety belts
properly. It also tells you some things you should not do
with safety belts.
And it explains the air bag system.
CAUTION:
Don't let anyone ride where he or she can't wear
a safety belt properly. If you are in a crash and
you're not wearing a safety belt, your injuries
can be much worse. You can hit things inside the
vehicle or be ejected from it. You can be seriously
injured or killed. In the same crash, you might
not be if you are buckled up. Always fasten your
safety belt, and check that your passengers' belts
are fastened properly too.

1-21
How to Wear Safety Belts Properly
Adults
This part is only for people of adult size.
Be aware that there are special things to know about
safety belts and children. And there are different
rules for smaller children and babies. If a child will be
riding in your vehicle, see the part of this manual called
ªChildren.º Follow those rules for everyone's protection.
First, you'll want to know which restraint systems your
vehicle has.
We'll start with the driver position.
Driver Position
This part describes the driver's restraint system.
Lap-Shoulder Belt
The driver has a lap-shoulder belt. Here's how to
wear it properly.
1. Close and lock the door.
2. Adjust the seat (to see how, see ªSeatsº in the Index)
so you can sit up straight.
3. Pick up the latch plate and pull the belt across you.
Don't let it get twisted.
The shoulder belt may lock if you pull the belt across
you very quickly. If this happens, let the belt go back
slightly to unlock it. Then pull the belt across you
more slowly.
4. Push the latch plate into the buckle until it clicks.

1-31 How the Air Bag Systems Work
Where are the air bags?
The driver's frontal air bag is in the middle of the
steering wheel.
The right front passenger's frontal air bag is in the
instrument panel on the passenger's side.
The driver's side impact air bag is in the side of the
driver's seatback closest to the door.