If your vehicle is
equipped with the
3.8L V6 engine,check
the power steering
fluid level with the
engine at normal
operating temperature.
1. Start the engine and
let it run until it
reaches normal
operating temperature
(the engine coolant
temperature gauge
indicator will be near
the center of the
normal area between H
and C).
2. While the engine idles, turn the steering wheel
left and right several times.
3. Turn the engine off.
4. Check the fluid level on the dipstick. It should be
within the FULL HOT range. Do not add fluid if the
level is within this range.
5. If the fluid is low, add fluid in small amounts,
continuously checking the level until it reaches the
correct operating range. Be sure to put the cap back
on the reservoir.
FILL
HOT
Maintenance and care
152
If your vehicle is
equipped with a 4.6L
V8 engine,check the
power steering fluid
level with the engine at
ambient temperature.
Allow at least one-half
hour after driving for
the power steering
fluid to cool.
1. Start the engine and
allow the engine to
idle.
2. Turn the steering
wheel left and right
several times.
3. Turn the engine off.
4. Check the fluid level in the reservoir. It should be
between the MIN and MAX lines. Do not add fluid if
the level is within this range.
5. If the fluid is low, add fluid in small amounts,
continuously checking the level until it reaches the
correct operating range. Be sure to put the cap back
on the reservoir.
TRANSMISSION FLUID
Checking automatic transmission fluid
Refer to your Scheduled Maintenance Guide for
scheduled intervals for fluid checks and changes.
Your transmission does not consume fluid. However,
the fluid level should be checked if the transmission
is not working properly, i.e., if the transmission slips
or shifts slowly or if you notice some sign of fluid
leakage.
Automatic transmission fluid expands when warmed.
To obtain an accurate fluid check, drive the vehicle
until it is at normal operating temperature
(approximately 30 km [20 miles]). If your vehicle has
MAXMIN
Maintenance and care
153
²Do not spray with cold water to avoid cracking
the engine block or other engine components.
²Never apply anything to the drive belt (including
belt dressing).
²Cover the highlighted areas to prevent water
damage when cleaning the engine.
²Never wash or rinse the engine while it is
running; water in the running engine may cause
internal damage.
Cleaning the instrument panel
Clean with a damp cloth, then dry with a dry cloth.
Avoid cleaner or polish that increases the gloss of
the upper portion of the instrument panel. The dull
finish in this area helps protect the driver from
undesirable windshield reflection.
Do not use chemical solvents or strong
detergents when cleaning the steering wheel
or instrument panel to avoid contamination of the
air bag system.
Cleaning the instrument cluster lens
Clean with a damp cloth, then dry with a dry cloth.
Do not use household or glass cleaners as these may
damage the lens.
Maintenance and care
188
warning light and
chime ............... 8,13,70
Safety seats
for children ........... 82,83
Seat belts (see Safety
restraints) .................. 65
Seats .......................... 62
child safety
seats .................... 82,83
cleaning .......... 189,190
easy access/easyout
feature ..................... 64
SecuriLock passive
anti-theft
system .............. 57,58,59
Servicing
your vehicle ............. 133
Spark plugs,
specifications .... 191,194
Special notice .............. 3
Specification chart,
lubricants .......... 193,194
Speed control ............ 42
Speedometer ............. 15
Starting
your vehicle ..... 90,91,92
jump starting ........ 128
Steering wheel
tilting ....................... 41
Tachometer ............... 15
Tires .... 124,160,161,162
changing ......... 124,125
checking
the pressure .......... 162
replacing ................ 163
rotating .................. 163
snow tires
and chains ............. 164
tire grades ............. 162
treadwear .............. 161
Towing ..................... 162recreational
towing .................... 114
trailer towing ........ 112
wrecker .................. 132
Traction control ... 52,98
active light .............. 12
Traction-lok
rear axle .................. 109
Transmission
automatic
operation ............... 100
fluid, checking and
adding
(automatic) ........... 153
fluid, checking and
adding (manual) ... 156
fluid,
refill capacities ...... 191
lubricant
specifications.. 193,194
manual operation .. 106
Trip odometer ........... 16
Trunk ......................... 60
remote release ... 40,54
Turn signal ............. 8,40
Vehicle
dimensions ............... 194
Vehicle Identification
Number (VIN) ......... 196
Vehicle loading ........ 109
Ventilating
your vehicle ............... 94
Warning chimes ......... 13
Warning lights
(see Lights) ................. 8
Washer fluid ............ 143
Water,
Driving through ....... 115
Windows
power ....................... 46
Index
217
