2000 CHEVROLET VENTURE fuel

[x] Cancel search: fuel

Page 327 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-3
CAUTION:
You can be injured and your vehicle could be
damaged if you try to do service work on a
vehicle without knowing enough about it.
Be sure you have sufficient knowledge,
experience, the pr

Page 328 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-4
If your vehicle is certified to meet California Emission
Standards (indicated on the underhood emission control
label), it is designed to operate on fuels that meet
California specifications. If s

Page 329 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-5
Fuels in Foreign Countries
If you plan on driving in another country outside the United 
States or Canada, the proper fuel may be hard to find. Never 
use leaded gasoline or any other fuel not rec

Page 330 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-6
While refueling, let the cap hang by the tether as shown.
To remove the cap, turn it slowly to the left
(counterclockwise). The cap has a spring in it; if you let
go of the cap too soon, it will s

Page 331 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-7
The malfunction indicator lamp (SERVICE ENGINE
SOON or CHECK ENGINE light) will come on if the
fuel cap is not properly reinstalled.
NOTICE:
If you need a new cap, be sure to get the right
type. Y

Page 332 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-8
Checking Things Under the Hood
CAUTION:
An electric fan under the hood can start up and
injure you even when the engine is not running.
Keep hands, clothing and tools away from any
underhood elect

Page 335 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-11
Before closing the hood, be sure all the filler caps are on
properly then follow these steps:
1. Lift the hood to relieve pressure on the hood prop.
2. Remove the hood prop from the slot in the h

Page 340 of 429

CHEVROLET VENTURE 2000 1.G Owners Manual 6-16
3. After replacing the air cleaner filter, seat the tabs on
the bottom of the panel into the slots at the bottom.
4. Latch the hooks to secure the panel in place. If the
panel moves easily, check