1-3 Four-Way Power Lumbar Control
(If Equipped)
If your vehicle has this
feature, the driver's and
passenger's seatback lumbar
support can be adjusted four
ways by moving the single
switch located on the side of
the seat.
To increase the lumbar support, push the switch forward.
To decrease the support, push the switch backward. To
adjust the location of the lumbar support, push the
switch upward or downward.
Keep in mind that as your seating position changes, as it
may during long trips, so should the position of your
lumbar support. Adjust the seat as needed.
If you have the optional personalization package, the
power lumbar control can be programmed for memory
recall. For more information, see ªMemory and
Personalization Featuresº in the Index.
Massaging Lumbar (If Equipped)
Push the top of the lumbar control where it is marked
AUTO briefly to activate the massage feature.
The massage cycle will run continuously for up to
10 minutes and can be interrupted by pushing the
lumbar control down briefly. The lumbar support can be
adjusted during the massage cycle by moving the switch
forward to increase support and rearward to decrease
support. The massage cycle will continue to run even if
the ignition is turned to OFF, unless interrupted.
Four-Way Rear Power Lumbar
(If Equipped)
Four-way lumbar, without the massage feature, is also
available for the outboard rear seating positions. To
activate the rear lumbar feature, push forward on the
switch located on the rear door trim to increase support
or rearward to decrease support. The lumbar switch can
also be moved up and down to adjust the location of
the support.
1-4 Adaptive Seat Control (Option)
The adaptive seat control is located on the outboard side
of each front seat. With the ignition in ON, first use the
power seat control to get the proper position.
Then press the top of the control where it is marked
AUTO. The system will inflate the cushion and take a
reading, then automatically deflate the cushion to a
suggested level of comfort, by distributing the
pressure evenly.
You may still wish to further adjust the overall firmness
or softness of the seat cushion. To get to your desired
level of comfort, hold the control up to increase the
firmness, or down for less firmness. When you let go of
the control, the seat will then automatically readjust to
your desired level of comfort.You will also need to adjust the lumbar support. To
increase the lumbar support, push forward on the control
and to decrease support, push rearward on the control.
(The lumbar will then automatically adjust to your
body's positioning for the duration of the trip in
two
-minute cycles.)
If you exit the vehicle after the system has been
activated and the seat is left unoccupied for more than
two minutes, the system will deflate. You will then need
to readjust the lumbar support upon returning to
your vehicle.
To turn off the adaptive seat feature while still in your
vehicle, press the control down briefly. The seat will
also deflate when the ignition is turned to OFF.
