00-14
Nuts, bolts
Loosen nuts or bolts, opposite to tightening
sequence.
Tighten and loosen bolts and nuts for securing
covers and housings in a diagonal sequence.
Especially delicate parts, such as clutch
pressure plates, must not be distorted. Loosen
and tighten bolts and nuts in stages in a
diagonal sequence.
The tightening torques stated apply to non-oiled
nuts and bolts.
Replace self-locking bolts and nuts.
The threads of bolts which are secured by a
locking fluid should be cleaned with a wire
brush. Then apply AMV 185 101 A1 when
inserting.
Threaded holes into which self-locking bolts or
bolts coated with locking fluid are screwed,
must be cleaned (e.g. tap). Otherwise there is a
danger of bolts shearing when subsequently
being removed.
Pa
ge 6 of 12 Re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.00.5
