39-158
Note:
Before performing following measurements turn
drive pinion at least five turns in both directions,
so that the tapered roller bearings settle.
Otherwise a false reading will be obtained.
- Place end measuring plate VW 385/33 onto drive pinion head.
- Remove master gauge and insert measuring mandrel in the housing.
The centering disc VW 385/3 faces toward cover for final drive
- Fit cover for final drive and tighten 4 bolts.
- Using adjustable ring, move 2nd centering disc out as far as possible
so that mandrel can still just be turned by hand.
Pa
ge 17 of 38 Drive
pinion and rin
g gear, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.19
