2000 AUDI A8 engine

01-9

8D0907557 1,8L R4/5VT MOTR HS D02 Coding 06051
WSC 00000

Indicated on display (ECM identification and coding)
8D0 _ _ _
_ _ _ _ Engine Control Module (ECM) Part No.
1.8 L Engine displacement
R4 / 5VT Engine type:
In-line (Reihenmotor), 4-Cyl.
5- Valve, Turbocharged
MOTR Motronic
HS
AT Manual transmission
Automatic transmission
D.. ECM software version
Coding ECM coding:
See coding table page WSC
12345 Plant number: indicates where the VAG 1551 scan tool was
used for the last coding and/or adaptation (as long as factory
coding has not been changed, WSC 00000 is displayed)
Pa
ge 15 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

01-11

Code Control Module (function 07)

If vehicle coding information is not as specified,
or if the ECM has been replaced, the ECM must
be coded as follows.

Required special tools and test equipment

VAG 1551/ VAG 1552 Scan Tool (ST) with VAG
1551/3 adapter cable

Coding procedure

- Connect VAG 1551/ VAG 1552 Scan Tool (ST)
and press buttons -0- and -1- to insert "Engine
Electronics" address word 01 (ignition switched
on) Page 01
-7 .
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -7- to select "Code Control Module function 07,
and press -Q- button to confirm input.
Code Control Module
HELP
Input code number XXXXX
(0-32000
)

Indicated on display
______________________________________________ - Input applicable code number for vehicle, and press -Q- button to
confirm input. ECM coding variations Page 01
-13
.
Function is unknown or

If indicated on display:
Pa
ge 17 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

01-15

Check Diagnostic Trouble Code (DTC)
Memory (function 02)


Required special tools and test equipment

VAG 1551/ VAG 1552 Scan Tool (ST) with VAG
1551/3 adapter cable

Checking

- Connect VAG 1551/ VAG 1552 Scan Tool (ST)
and press buttons -0- and -1- to insert "Engine
Electronics" address word 01 (engine running at
idle) Page 01
-7 .

Note:
If engine does not start:
- Operate starter to crank engine for approx. 6
seconds, then do not switch ignition off.

- Press PRINT-button to switch scan tool printer
on (indicator light in button lights up). Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -2- to select "Check DTC Memory" function 02,
and press -Q- button to confirm input.
Pa
ge 22 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

01-17
Diagnostic Trouble Code (DTC) table

Notes:

The DTC table is organized according to SAE and VAG diagnostic trouble codes.
The "MIL" column labeled specifies the MIL switching condition associated with that DTC.
DTCs that do not switch on the MIL after the malfunction is recognized by the ECM are identified by the MIL switching
condition "Off."
DTCs that do switch on the MIL immediately after the malfunction is recognized by the ECM are identified by the MIL
switching condition "Immed."
DTCs that are recognized by the ECM and switch on the MIL after two consecutive driving cycles (Dcy) are identified by
the MIL switching condition "2 Dcy."
Always correct malfunctions that are designated "immediately" as soon as possible, followed by those malfunctions that
are designated "2Dcy."
When all repairs have been completed, erase DTC memory ( Page 01
-40
) and then generate new readiness code
Page 01
-62

DTCs that are recognized as a result of intermittent malfunctions, or DTCs that are not erased after repairs, are classified
as sporadic malfunctions. These are identified by the designation "SP" appearing in the display.
A sporadic malfunction will be erased if it no longer occurs after 50 driving cycles during which the engine reaches
Pa
ge 24 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

01-18

Diagnostic Trouble Code
(DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0102 16486 Mass or Volume Air Flow Circ.
Low Input 2
Dcy - Check Mass Air Flow (MAF) sensor -G70-
Page 24
-57

P0103 16487 Mass or Volume Air Flow Circ.
High Input
P0107 16491 Manifold Abs. Pressure or Bar.
Pressure
Low Input 2
Dcy - Check Manifold Absolute Pressure (MAP) sensor
-G71- Page 24
-131

P0108 16492 Manifold Abs. Pressure or Bar.
Pressure
High Input
P0112 16496 Intake Air Temp. Circ.
Low Input 2
Dcy - Check Intake Air Temperature (IAT) sensor -G42-
Page 24
-69

P0113 16497 Intake Air Temp. Circ.
High Input
P0116 16500 Engine Coolant Temp. Circ.
Range/Performance 2
Dcy - Check Engine Coolant Temperature (ECT)
sensor -G62- Page 24
-63

P0117 16501 Engine Coolant Temp. Circ.
Pa
ge 26 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

Low Input
P0118 16502 Engine Coolant Temp. Circ.
High Input
Pa
ge 27 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

01-21

Diagnostic Trouble Code
(DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0300 16684 Random/Multiple Cylinder
Misfire Detected 2 Dcy /
blink - Fuel level too low, check fuel level and add
if necessary
- Check misfire detection Page 28
-12
- Check fuel injectors Page 24
-87
- Output Diagnostic Test Mode (DTM)
Page 01
-42

- Check engine speed (RPM) sensor -G28-
Page 24
-75

P0301 16685 Cyl. 1
Misfire Detected
P0302 16686 Cyl. 2
Misfire Detected
P0303 16687 Cyl. 3
Misfire Detected
P0304 16688 Cyl. 4
Misfire Detected
P0321 16705 Ign./Distributor Eng. Speed Inp.
Circ. 2 Dcy
- Check engine speed (RPM) sensor -G28-
Pa
ge 31 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1

01-22

Diagnostic Trouble
Code (DTC)
Malfunction text
MIL
Corrective action
SAE
VAG



P0327 16711 Knock Sensor 1
Circ.
Low Input Immed.
- Check knock sensors and knock sensor control Page 28
-5
P0332 16716 Knock Sensor 2
Circ.
Low Input
- Check knock sensors and knock sensor control Page 28
-5
P0422 16806 Main Catalyst,
Bank1
Efficiency Below
Threshold 2 Dcy
Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo Engine Mechanical,
Engine Code(s): AEB, ATW, Repair Group 26.
- Replace Three Way Catalytic Converter (TWC):
P0441 16825 EVAP Emission
Contr. Sys.
Incorrect Purge
Flow 2 Dcy
- Check Evaporative Emissions (EVAP) canister purge regulator
valve output Diagnostic Test Mode (DTM), page Page 01
-42

Pa
ge 33 of 57 On Board Dia
gnostic
(OBD
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.01.1