Page 30 of 75
37-27
Cover for Tiptronic shift mechanism,
disassembling and assembling
Overview
Disassembly of suspension strut 1 -
Upper cover
With integrated Tiptronic Switch -F189-Tiptronic Switch -F189-, removing and
installing page 37
-30
2 -
Masking panel
With integrated solenoids -C- and -D-
3 -
Lower cover Guides the masking panel
- Remove shift mechanism cover page
37
-24
Pa
ge 30 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
Page 35 of 75
37-32
Tiptronic shift mechanism,
disassembling and assembling
(sequence)
Disassembly of suspension strut
- Remove shift mechanism page 37
-6 .
- First remove stop buffers from cable lever
- Shift selector lever into Tiptronic position and
then remove frame.
- Shift selector lever into position "2".
- Disengage lever for locking cable by lifting it out
of its bearing and remove from shift mechanism
housing.
- Shift selector lever into position "D".
- Catch spring for Tiptronic position is carefully
pried out of the shift mechanism housing from
the outside.
- Pull out retainer for selector lever bushings.
Pa
ge 35 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
Page 38 of 75
37-34
Assembly of suspension strut
- Clip catch into cable lever.
- Slide cable lever/catch into the shift mechanism
housing with opening of the catch forward.
- Drive both pins of the cable lever/catch into the
shift mechanism housing from both sides up to
stop.
- Press catch spring with roller for selector lever
position into its mount in shift mechanism
housing up to stop.
- Shift lock solenoid together with locking latch
must be slid into the shift mechanism housing
from the top.
- Carefully drive in pin for locking latch.
- Using a screwdriver, mechanically check for
engagement of the locking latch in position "P"
and "N" of selector lever.
- Insert complete selector lever into shift
mechanism housing.
Pa
ge 38 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
Page 41 of 75
37-36
Selector lever, disassembling and
assembling
- Remove selector lever page 37
-32
.
Disassembly of suspension strut
Assembly of suspension strut - Drive out selector lever pivot pin using a drift.
- Slide link with Tiptronic spring with raised pulling rod out of the selector
lever.
- Release tension of compression spring and also remove pull-lever and
compression spring from the selector lever.
Installation position:
Curvature and edge point in direction of travel. - Set compression spring -B- onto pull-lever -A-.
- Guide pull-rod with compression spring into the selector lever.
- Check whether the pull-lever glides on both guides -C- of selector
lever.
Pa
ge 41 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1
