35-18
14 -
Needle bearing for 2nd speed sliding gear
SplitOil with gear oil before installing
15 -
2nd speed sliding gear Pressing off Fig. 12Before installing, fit spring and slide needle
bearing onto hollow shaft After installing, check axial clearance with
a feeler gauge (0.15-0.35 mm)
16 -
Synchro-ring for 2nd gear Coated with MolybdenumChecking for wear Fig. 2
, Page 35
-9
Pa
ge 7 of 21 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.2
35-20
22 -
Needle bearing for 1st speed sliding gear
Oil with gear oil before installing
23 -
1st speed sliding gear Before installing, insert spring Fig. 1 ,
Page 35
-9
After pressing on -item 24 -, check axial
clearance
24 -
Inner race for small tapered roller bearing
1) Pressing off Fig. 9Pressing on Fig. 10Low friction bearing; do not oil when
measuring friction torque
25 -
Outer race for small tapered roller bearing
1) Driving out Fig. 15Pressing in Fig. 16
26 -
Shim "S4"
Adjustment overview Page 39
-37Pa
ge 9 of 21 Drive
pinion and hollow shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.2
