42-41
6 -
Eccentric bolt
Adjusting axle camber page 44
-22
Do not turn more than 90 from left or right
of center position (90 is minimum or
maximum adjustment)
7 -
Self-locking nut
Always replace70 Nm (52 ft lb) + 1/4-turn (90 )Vehicle must be standing on its wheels
when tightening nut
8 -
Support for adjusting camber Welded to control arm on both sidesMake sure that eccentric bolt and washer
are correctly located
9 -
Eccentric washer
10 -
Self-locking nut Always replace50 Nm (37 ft lb) + 1/4-turn (90 )When tightening, hold upper control arm
horizontal Vehicle must be standing on its wheels
when tightening nut
Pa
ge 3 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3
42-42
11 -
Suspension strut
Removing and installing page 42
-65
Servicing page 42
-68
12 -
Wheelhousing
13 -
Bolt + washer
55 Nm (41 ft lb)
14 -
Bolt Always replace
15 -
Bolt Always replace
16 -
Upper control arm Removing and installing page 42
-65
Servicing page 42
-81
17 -
Wheel bearing housing
18 -
Washer
Always replace
19 -
Self-locking nut Always replace50 Nm (37 ft lb) + 1/4-turn (90 )
20 -
Self-locking nut
Pa
ge 4 of 32 Rear axle, servicin
g (all-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.3
