2000 AUDI A4 buttons

01-132

Code Control ModuleEnter code number XXXXX
(0-32000)

Indicated on display
- Enter code number:
Coding:
00101
00 Place holders, disregard
1 Audi A4
0 Arming mode static
1 Sedan
2 Avant
Code Control Module
Q
Enter code number 00101
(0-32000
)

- Indicated on display
- Press -Q- button to confirm input.
4B0951173 Interior monitoring
D02
Coding 00101
WSC 06812

Indicated on display
-
End coding by pressing button.
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -6- to select "End Output" function 06.
This will end the function.
Rapid data transfer
Q
06 - End Output

Indicated on display
- Press -Q- button to confirm input.
Pa
ge 35 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.4

01-133

Read Measuring Value Block (scan tool
function 08)


Carrying out "Read Measuring Value Block"
function 08
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block"
function 08.
Rapid data transfer
Q
08 - Read Measurin
g Value Block

Indicated on display
- Press -Q- button to confirm input.
Read Measuring Value BlockInput displa
y group number XXX

Indicated on display
The selected measuring value block is now indicated in standard format.
Evaluation page 01
-134
. - Press buttons -0-, -0- and -1- to input display group number 1 (001).
- Press -Q- button to confirm input.
Pa
ge 36 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.4

01-135

Adaptation (scan tool function 10)

The following changes can be implemented and
saved using the adaptation function:

Sensitivity settings of the ultra-sound sensors
can be set so that the sensors react with less
sensitivity.

Carrying out "Adaptation" function 10
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -1- and -0- to select "Adaptation" function 10.
Rapid data transfer
Q
10 - Adaptation

Indicated on display
- Press -Q- button to confirm input.
AdaptationInsert channel number XX

Indicated on display
- Press buttons -0- and -1- to insert channel number 1.
Adaptation
Q
Channel displa
y 1

Indicated on display
- Press -Q- button to confirm input.
Pa
ge 38 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.4

01-137

Erase DTC Memory (scan tool function
05)


Note:
If DTC memory cannot be erased, check DTC
memory again and repair malfunctions.

Requirements
DTC memory checked
All malfunctions repaired
After successfully checking DTC memory:

Carrying out "Erase DTC Memory" function
05
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.
Rapid data transfer
Q
05 - Erase DTC Memory

Indicated on display
- Press -Q- button to confirm input.
Rapid data transfer DTC memory is erased!

Indicated on display
DTC memory is now erased.
Pa
ge 41 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.4

01-139

End Output (scan tool function 06)


Carrying out "End Output" function 06
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -6- to select "End Output" function 06.
Rapid data transfer
Q
06 - End Output

Indicated on display
- Press -Q- button to confirm input.
Rapid data transfer
HELP
Insert address word XX

Indicated on display
- Switch ignition off.
- Disconnect VAG1551 Scan Tool (ST) from Data Link Connector (DLC).
Pa
ge 44 of 44 Ultrasonic interior monitorin
g On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.4