70
Note:
Try using corners of the headlight housings or
two screws that are the same height and as far
apart as possible on the vehicle.
- Carefully tighten hand wheel without changing
Beamsetter position.
- Find correct State or Province Inclination %
specification for the low beam adjustment (If
there is no local specification use 1.2%).
Note:
DO NOT use the Inclination % molded into the
plastic of the headlight housing near the
headlight adjustment screws; it is for Europe
only!
- Set Beamsetter "Scaled wheel" to the proper low
beam inclination %.
- Adjust height (vertical) alignment first. Turn
headlight height adjuster screw to align the
upper edge of the flat portion of the beam with
the center horizontal line of the grid on the
Beamsetter pattern screen.
Pa
ge 71 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6
