2000 AUDI A4 oil pressure

17-1


Lubrication system
components, removing and
installing

Note:

If large quantities of metal shavings or particles
are found in the engine oil when repairing the
engine, all oil passages must be cleaned
carefully, and the oil cooler replaced in order to
prevent further damage occurring later.
The oil level must not be above max. mark on
dipstick - danger of damage to catalytic
converter!
Oil spray jet and pressure relief valve Fig.
1 , Page 17
-6
Viscosity grades and oil specifications:

Repair Manual, Maintenance

Oil system capacity:

Repair Manual, Maintenance

Pa
ge 1 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-2


Part I - Oil pump/oil pan components

1 -
28 Nm
2 -
Limit stop for torque reaction support
3 -
Oil pan
Apply silicone sealant D 176 404 A2 before
installing Removing and installing Page 17
-11
4 -
Oil pan
With pressure relief valve (12 bar)Removing and installing Page 17
-28
Before installation check whether the two
dowel sleeves -Pos. 12 - for the
centralizing of the oil pump/cylinder block
are present Replace pump if there is scoring on moving
surfaces and gear teeth Tightening torque for oil pump cover to oil
pump housing: 10 Nm
Pa
ge 2 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-6


Fig. 1 Oil spray jet and pressure relief valve
1 - Oil spray jet (for piston cooling)
2 - Bolt with pressure relief valve - 27 Nm

Opening pressure 1.3 to 1.6 bar
Pa
ge 6 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-7


Part II - Oil filter bracket components

1 -
Screw plug - 40 Nm
2 -
Sealing ring
Always replace
3 -
Spring For pressure relief valve, approx. 4 bar
4 -
Piston For pressure relief valve, approx. 4 bar
5 -
Gasket Always replace
6 -
Oil retention valve Tighten to 8 NmBuilt into oil filter bracket
7 -
O-ring Always replaceSlide on until flush with collar on pipe -Item
9 -
Pa
ge 7 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-9


Repair Manual, Maintenance
17 -
Oil pressure switch -F1-, 1.4 bar - 25 Nm
Black insulationChecking Page 17
-30
18 -
Sealing ring
If seal is leaking, cut open and replace
19 -
15 Nm +
1/4 turn (90 ) further
Always replace
20 -
Gasket Always replaceEngage in projections on oil cooler
21 -
Oil filter Observe change intervalsObserve installation instructions on oil filterTighten to 20 Nm
Pa
ge 9 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-10


22 -
25 Nm
23 -
Oil cooler
See note Page 17
-1
Ensure clearance to adjacent componentsCoolant hose connection diagram Page 19
-2
24 -
Oil filter bracket
With pressure relief valve, approx. 4 bar
Pa
ge 10 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-30


Oil pressure and oil pressure switch,
checking

Special tools and equipment

VAG 1342
VAG 1527 B
VAG 1594 A
Pa
ge 30 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1

17-31

Test requirements:

Oil level OK.
Engine oil temperature approx. 80 C.

Oil pressure warning lamp -K3- must come
on when ignition is switched on.
In vehicles with auto check system the "OK"
display must appear (call up symbol).

Testing oil pressure switch

- Disconnect wire from oil pressure switch.

- Remove oil pressure switch and screw in oil pressure tester VAG 1342.
- Thread oil pressure switch -2- intoVAG 1342.
- Connect brown wire -1- of tester to Ground (-).
Pa
ge 31 of 35 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.17.1