2000 AUDI A4 air filter

15-15

Cylinder head cover, removing and
installing


Removing

- Remove engine cover -arrows-.

- Remove air filter cover -arrow-.
Pa
ge 18 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1

15-21

Procedure

Engine in vehicle
Lock carrier must be in service position
Page 13
-1 .

Note:
All cable ties which are released or cut open
when removing must be located in the same
position when installing.

- Observe or obtain radio anti-theft code on
vehicles with coded radio.

- Disconnect Ground strap at battery with ignition
switched off.

- Drain coolant Page 19
-4 .

- Remove intake line Page 15
-9 .

- Remove ribbed belt and tensioner for ribbed belt
Page 13
-18
.

- Remove air filter cover -arrow-.
Pa
ge 24 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1

15-22


- Disconnect connectors as follows:
1 - on ACF valve (in addition, remove ACF valve from air filter housing)
2 - on air mass meter
3 - on solenoid valve for charge pressure control -N75-
- Disconnect hose connections, move wiring aside and remove air filter
housing -arrows-.

- Disconnect connector -arrow- from camshaft adjuster.
Pa
ge 25 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1