2000 AUDI A4 ignition

01-18

Rapid data transfer DTC Memor
y is erased!

Indicated on display:
Note:
During testing and repair work, malfunctions can be recognized from other
control modules (e.g. disconnected harness connectors). Therefore on
completion, the DTC memories of all control modules must be checked
and erased.
End output -
Press button.- After repairs, check DTC memory again.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -6- to select function "End Output" and confirm
entry with -Q- button.
Rapid data transfer
HELP
Insert address word XX

Indicated on display:
- Switch ignition off and disconnect diagnostic connector.
Pa
ge 21 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-48

DTC
Description of malfunction
Corrective action
SAE
VAG


P1355 17763 Cyl. 1, ignition circuit
Open Circuit
2) - Check activation of power output stages Page 28
-11
P1356 17764 Cyl. 1, ignition circuit
Short to B+
2)
P1357 17765 Cyl. 1, ignition circuit
Short to ground
2)
P1358 17766 Cyl. 2, ignition circuit
Open Circuit
2)
P1359 17767 Cyl. 2, ignition circuit
Short Circuit to B+
2)
P1360 17768 Cyl. 2, ignition circuit
Short Circuit to ground
2)
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is
recognized after the engine has been restarted. Significance of MIL Page 01
-3 .
Pa
ge 58 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-49

DTC
Description of malfunction
Corrective action
SAE
VAG


P1361 17769 Cyl. 3, ignition circuit
Open Circuit
2) - Check activation of power output stages Page 28
-11
P1362 17770 Cyl. 3, ignition circuit
Short to B+
2)
P1363 17771 Cyl. 3, ignition circuit
Short to ground
2)
P1364 17772 Cyl. 4, ignition circuit
Open Circuit
2)
P1365 17773 Cyl. 4, ignition circuit
Short Circuit to B+
2)
P1366 17774 Cyl. 4, ignition circuit
Short Circuit to ground
2)
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is
recognized after the engine has been restarted. Significance of MIL Page 01
-3 .
Pa
ge 59 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-50

DTC
Description of malfunction
Corrective action
SAE
VAG


P1367 17775 Cyl. 5, ignition circuit
Open Circuit
2) - Check activation of power output stages Page 28
-11
P1368 17776 Cyl. 5, ignition circuit
Short to B+
2)
P1369 17777 Cyl. 5, ignition circuit
Short to ground
2)
P1370 17778 Cyl. 6, ignition circuit
Open Circuit
2)
P1371 17779 Cyl. 6, ignition circuit
Short Circuit to B+
2)
P1372 17780 Cyl. 6, ignition circuit
Short Circuit to ground
2)
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is
recognized after the engine has been restarted. Significance of MIL Page 01
-3 .
Pa
ge 60 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-75

Output Diagnostic Test Mode (DTM)


Notes:

The DTM can only be performed with the
ignition switched on and the engine not running.
The DTM is terminated if the engine is started
or if an engine speed pulse is detected.
During the DTM, individual control elements will
be activated for approx. 1 minute, or until the
test program is advanced to the next control
element by pressing the button.

The control elements can be tested either by
listening or by touching.
If the DTM is to be repeated, the engine must
be started. The engine control module needs to
detect an engine speed of more than 300 rpm.
The electric fuel pump runs continuously
throughout the DTM.
Pa
ge 92 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-77

Test requirements

Fuses for engine electronics OK
Fuel pump relay OK

- Connect vehicle diagnostic, testing and
information system VAS 5051 or VAG1551 scan
tool and select engine electronics control
module by entering address word "01" Page 01
-9 . When doing this the ignition must be
switched on.
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -3- to select function "Output Diagnostic Test
Mode."
Rapid data transfer
Q
03 - Output Dia
gnostic Test Mode

Indicated on display
Pa
ge 95 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-87

Output Diagnostic Test Mode END

Indicated on display
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display (function selection):
Note:
The output Diagnostic Test Mode (DTM) cannot be re-initiated until the
engine is started and ignition switched off and then on again.
Pa
ge 105 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1

01-88

Basic setting


With the ignition on and engine not running,
the following operation can be performed in
the "Basic setting" mode (function 04):

Adaptation of throttle valve control module to
ECM Page 24
-146


Vehicles with automatic transmission:
Adaptation of kick down function of accelerator
pedal position sensor to ECM Display group
63 ( Page 24
-166
)

With the engine running, the following
operations can be performed in the basic
setting mode "Function 04":

Learning process (adaptation) for oxygen
sensor control every display group

Troubleshooting by targeted activation and
deactivation of oxygen sensor control display
group 99 (Observe note on page Page 24
-
81
).
Pa
ge 106 of 166 Motronic s
ystem, On Board Dia
gnostic
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1