2000 AUDI A4 airbag

01-43

Vehicles 1999 : from VIN 8D XA 200 001 8D0959655K
Airbag Front+Side
D004
Codin
g 01106
WSC 06812

Explanation of display
Note:
For vehicles with Airbag 8, display will indicate airbag front + side or
airbag front + side curtain in place of Airbag V, Airbag 7. - Indicated on display after approx. 5 seconds:
8D0959655K: Part No. of airbag control module (front and side
airbags) 8D0959655G: Part No. of airbag control module (front and side curtain
airbags) Airbag front + side: component identification for airbag systemD004: software version of control module for airbag in Audi vehiclesCoding 01106: coding of airbag control module. Coding table page 01
-54

WSC 06812: dealership number
-
Press button to return to "Select function XX" prompt.
Rapid data transfer
HELP
Select function XX

Indicated on display
Pa
ge 57 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-44

Output Diagnostic Test Mode (scan tool
function 03) (vehicles 1997 1998)

The Output Diagnostic Test Mode is used to
check operation of the crash response system.
When airbags are triggered, the central locking
system unlocks the doors and simultaneously
blocks internal switches. Emergency flashers and
interior lights are switched on.

Notes:
Before initiating the Output Diagnostic Test
Mode, switch central locking system to "closed"
by operating internal switch.

Carrying out "Output Diagnostic Test Mode"
function 03 Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -3- to select "Output Diagnostic Test Mode"
function 03.
Rapid data transfer
Q
03 - Output Dia
gnostic Test Mode

Indicated on display
- Press -Q- button to confirm input.
Output Diagnostic Test Mode Signal: Open central locking system

Indicated on display
The central locking system must switch to "open."
Pa
ge 58 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-46

Output Diagnostic Test Mode (scan tool
function 03) (vehicles 1999 )


Vehicles up to calendar week (KW) 18.99
Output Diagnostic Test Mode (DTM) is used to
check the operation of the crash response
system. When airbags are triggered, the central
locking system switches immediately to "open"
and the inside door lock switches are blocked.
Emergency flashers and interior lights are
switched on.

Notes:

Before initiating output Diagnostic Test Mode
(DTM), set the central locking system to
"closed" by operating the interior switch.
Set interior switch to "door contact" position.
After output DTM is initiated, central locking
cannot be operated until the DTC memory of
the central locking control module is erased.

Carrying out "Output Diagnostic Test
Mode" (function 03)
Rapid data transfer
HELP
Select function XX

Indicated on display
-
Press buttons -0- and -3- to select "Output Diagnostic Test Mode"
Pa
ge 61 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-48

Vehicles from calendar week (KW) 18.99 on
Output Diagnostic Test Mode (DTM) is used to
check the operation of the crash response
system. When airbags are triggered, the central
locking system switches immediately to "open"
and the inside door lock switches are blocked.
Emergency flashers and interior lights are
switched on and the fuel supply is interrupted.

Notes:

Before initiating output Diagnostic Test Mode
(DTM), set the central locking system to
"closed" by operating the interior switch and
start the engine.
Set interior light switch to "door contact"
position.
After output DTM is initiated, central locking
cannot be operated until the DTC memory of
the central locking control module is erased.

Carrying out "Output Diagnostic Test
Mode" (function 03)
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -3- to select "Output Diagnostic Test Mode"
function 03.
Pa
ge 64 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-51

Code Control Module (scan tool function
07)


Notes:
Control modules are supplied uncoded.
An uncoded control module will cause the
airbag Malfunction Indicator Lamp (MIL) -K75-
to light up continuously.
The coding procedure is carried out using the
VAG1551 Scan Tool (ST).
If no coding appears on the VAG1551 Scan Tool
(ST), or if a new control module has been
installed, carry out the coding procedure as
follows:
Pa
ge 68 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-52

Carrying out "Code Control Module" function
07 Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -7- to select "Code Control Module" function 07.
Rapid data transfer
Q
07 - Code Control Module

Indicated on display
- Press -Q- button to confirm input.
Code Control ModuleEnter code number XXXXX
(0-32000
)

Indicated on display
Vehicles 1997:
Coding table for airbag control module - Enter coding for airbag control module using keypad:System variation
Coding
Driver and passenger-side airbag active,
both belt tensioners active 00127
Pa
ge 69 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-53

Vehicles 1997 1999 up to VIN 8D XA 200
000:
Coding table for airbag control module

System variation
Coding
Vehicles with front airbags, front side
airbags and front belt tensioner 00102
Vehicles with front airbags, front side
airbags, front belt tensioner and 2 rear
belt tensioners 00104
Vehicles with front airbags, front side
airbags, front belt tensioner and 3 rear
belt tensioners 00106
Vehicles with front airbags, and front
belt tensioners 00002
Vehicles with front airbags, front belt
tensioners and 2 rear belt tensioners 00004
Vehicles with front airbags, front belt
tensioners and 3 rear belt tensioners 00006
Pa
ge 70 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2

01-54
Vehicles 1999 : from VIN 8D XA 200 001 on Coding table for airbag control module
Airbag system
Coding
Airbag 8 Vehicles with front airbags, front side airbags, front seat belt tensioners, two rear seat belt
tensioners 00104
Airbag 8 Vehicles with front airbags, front side airbags, front seat belt tensioners, three rear seat belt
tensioners 00106
Airbag 8 Vehicles with front airbags, front side airbags, front seat belt tensioners, side curtain airbags two
rear seat belt tensioners 00304
Airbag 8 Vehicles with front airbags, front side airbags, front seat belt tensioners, side curtain airbags three
rear seat belt tensioners 00306
Code Control Module
Q
Enter code number 00104
(0-32000
)

Indicated on display (e.g. 00104)
- Press -Q- button to confirm input.
8D0959655K Airbag Front+Side D00 Codin
g 00104
WSC 06812

- Indicated on display (control module identification will appear on display together
with coding that has been entered, e.g. 00104).
Pa
ge 71 of 74 Airba
g system
(with and without side airba
g)
On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD04.01.2