17-4
19 -
Engine oil temperature sensor -G8-
10 Nm (7 ft lb)For oil temperature gaugeWhiteIf seal is leaking, replace seal
20 -
Oil seal Replacing page 15
-14
21 -
Tensioner
Compress and secure before removing
page 13
-12
22 -
10 Nm
Use locking fluid D 000 600 A2 when
installing
23 -
Washer
24 -
Bearing bushing For tensioner lever
25 -
Washer
26 -
Bolt 25 Nm (18 ft lb)
27 -
Tensioning lever
28 -
Bearing bushing
Pa
ge 6 of 34 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.17.1
17-19
Oil pump, removing and installing
- Remove noise insulation panel (arrows).
- Drain engine oil.
- Collect engine oil in appropriate receptacle.
Vehicles with automatic transmission - Unbolt both stabilizer mounting brackets -2- from subframe.
- Lower stabilizer not more than 10 cm (3.94 in.) and secure using wire.
- Unbolt oil cooler line bracket from right-side of oil pan.
Pa
ge 23 of 34 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.17.1
