24-77
Throttle Position (TP) sensor,
checking and adjusting
Notes:
To functionally check the Throttle Position (TP)
sensor Repair Group 01, Read measuring
value block, display group 002.
Component locations page 24
-1 .
Checking resistance
If any one of the specified values is not obtained: -
Switch multimeter (Fluke 83 or equivalent) to measure resistance ( )
and connect between terminals 1 and 2.
Specified value: 1500 to 2600 - Measure resistance between terminals 2 and 3.
Specified value (closed throttle): approx. 750 to 1300 - Slowly move throttle from closed throttle position to wide open throttle
position.
Resistance must increase gradually to max. 3600
- Replace throttle position sensor.
Pa
ge 1 of 5 Throttle Position
(TP
) sensor, checkin
g and ad
justin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.22
