2000 AUDI A4 reset

01-229
Display group 039 (Statistical data on combustion misfiring recognition)
Notes:

Combustion misfiring recognition always occurs in relation to 1000 RPM (1000th revolution interval).
The display values are reset only be erasing DTC memory. Selected observation time periods can be defined by resetting
the display values.
Display
shows Display specified
value Designation/diagnosis
Basic setting
39
1 2 3 4 0 - 255 1 = Highest number of instances of combustion misfiring within 1000 RPM
0 - 255 2 = Number of "1000the revolution intervals" with 30 and/or more than 30 instances
of combustion misfiring
0 - 255 3 = Number of "1000th revolution intervals" with 5 and/or more than 5 instances of
combustion misfiring
X X X X X X 4 = Cylinders involved in combustion misfiring during the entire statistics period
Pa
ge 323 of 366 On Board Dia
gnostic
(OBD
) - Multi
port Fuel In
jection
(MFI
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.01.1

01-234

Display
shows Display specified
value Designation/diagnosis
Basic setting
42
1 2 3 4 400 - 640 C
1 = Calculated exhaust gas temperature in front of three way catalytic converter
(calculated value inside control module)
X X X X X X X X 2 = Diagnosis status and/or result
X X X X X X X X 3 = Diagnostic conditions 1 for heated oxygen sensor diagnosis (response time of
heated oxygen sensor)
X X X X X X X X 4 = Diagnostic conditions 2 for heated oxygen sensor diagnosis (response time of
heated oxygen sensor)
Note on display field 2:
If after diagnosis all 8 displays are "1" and the engine is stopped and started again, display values 1 and 2 are reset to "0" and
values 3 to 8 remain at "1." If during the trip diagnostic conditions (display fields 3 and 4) are achieved, display values 1 and 2
are set to "1" (diagnosis active) and display values 3 to 8 are set to"0".
Value "0": Diagnosis not active and/or diagnosis not finished and/or diagnosis result not OK
Value "1": Diagnosis active and/or diagnosis finished (whether OK or not OK) and/or diagnosis result OK X
X
X
X
X
X
X
X
Meaning of 8-digit "Diagnosis status and/or result"

1 = Diagnosis, bank 1 active

2 = Diagnosis, bank 2 active

3 = Diagnosis, bank 1 finished

4 = Diagnosis result, bank 1, flank fall time
Pa
ge 329 of 366 On Board Dia
gnostic
(OBD
) - Multi
port Fuel In
jection
(MFI
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.01.1

01-256

Readiness code, reading and generating


Note:
OBD II legal regulations require a display
(readiness code) that shows inspection
readiness for the annual exhaust emissions test.
The readiness code shows that every component
and/or system that affects exhaust emissions,
which can lead to the MIL switching on, has been
operated at least once with positive results.

Note:
The readiness code is reset and/or erased every
time:

DTC memory is erased (either with display
group 01 function 05 or display group 33 mode
4)
ECM harness connector is disconnected from
ECM -J192- (e.g. connecting test box VAG
1598/19, replacing ECM, etc.)
Battery is disconnected
Pa
ge 355 of 366 On Board Dia
gnostic
(OBD
) - Multi
port Fuel In
jection
(MFI
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.01.1

01-258

Generating readiness code

Notes:

In order to generate the readiness code, a
"mixed city and highway" drive (short test) has
to be taken. A "mixed city and highway" drive is
understood as approx. 1-1/2 to 5 minutes at 80-
100 km/h (50-63 mph) with manual
transmission in 4th or 5th gear, or automatic
transmission selector lever in "D" position,
preferably in 4th gear.
If a malfunction is recognized and stored by the
engine control module during a "mixed city and
highway" trip, and/or the Malfunction Indicator
Lamp (MIL) is switched on, the brief test can be
interrupted by the technician and the
malfunction repaired according to the diagnostic
trouble code.
If the readiness code has to be generated, the
DTC memory should be checked (no faults
should be stored) and erased (readiness code
will be reset) before taking the "mixed city and
highway" trip.
Pa
ge 357 of 366 On Board Dia
gnostic
(OBD
) - Multi
port Fuel In
jection
(MFI
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.01.1