2000 AUDI A4 fuel pressure

24-2


1 -
Heated Oxygen Sensor (HO2S) -G39- with
Oxygen Sensor (O2S) heater -Z19-
2 -
Engine Coolant Temperature (ECT) sensor
-G62-
4-pin connector
3 -
Harness connector for: Heated Oxygen Sensor (HO2S) -G39- and
Oxygen Sensor (O2S) heater -Z19- (4-pin,
brown) Oxygen Sensor (O2S) behind Three Way
Catalytic Converter (TWC) -G130- with
Oxygen Sensor (O2S) heater -Z29- (4-pin,
black) Engine speed (RPM) sensor -G28- (3-pin,
gray) Knock sensor (KS) 1 -G61 (3-pin, green)Knock sensor (KS) 2 -G66- (3-pin, blue)
4 -
Electronics box (E-box) with: Motronic Engine Control Module (ECM) -
J220- Barometric Pressure (BARO) sensor -F96-
Pa
ge 2 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

24-5

Safety precautions


WARNING!

Fire hazard! Do not smoke, work near heaters
or open flame, or have anything nearby that
could ignite fuel. The fuel system is under
pressure. Before opening, cover connections
with a rag, and open carefully to release
pressure. Be alert when working on or near
the engine and ignition wires. High secondary
ignition voltage can cause serious personal
injury and damage vehicle components.

DO NOT touch or disconnect ignition system
wires when the engine is running or being
cranked at starting RPM.
DO NOT operate starter if fuel injectors are
removed.

Be sure the ignition is switched OFF, when:
Disconnecting or connecting the battery,
ignition wires, or test equipment leads
Disconnecting fuel injection system wiring
Washing the engine or engine
compartment.
Pa
ge 5 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

24-8
Technical data

Engine code
AEB

Engine idle speed:
not adjustable, maintained by Idle Air Control (IAC) 820-900 RPM
Engine speed (RPM) upper limit:
actuated by switching off fuel injectors approx. 6500 RPM
Fuel system pressure at idle Vacuum hose for pressure regulator connected: approx. 3.5 bar
(50 psi)

Vacuum hose for pressure regulator disconnected: approx. 4.0 bar
(58 psi)

Residual fuel pressure after 10 minutes at least 2.5 bar
Fuel injectors Spray pattern: approx. the same for all fuel injectors

Resistance
1)
:
11-13 ohm
1) Engine at room temperature; with the engine at normal operating temperature the resistance increases by approx. 4-6
ohms.
Pa
ge 11 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

24-22
Evaluation of display group 32 Display group:
32


Display fields: 1
+ 2
Possible cause
Corrective action
O2S control
learning value:
-26.0 to -8.0 %
Engine oil dilution (when partial load learning value
is normal, display field 2)
- Change engine oil, or carry out extensive road
test and check again.


Fuel pressure too high- Check fuel pressure regulator Page 24
-93


Fuel injector leaking- Check fuel injectors Page 24
-87


Oxygen Sensor (O2S) heater malfunction- Check O2S heater Page 24
-27
O2S control
learning value:
8.0-26.0 %
Intake air leaks ("false air") or exhaust manifold
leaks (when partial load learning value is normal,
display field 2)
Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo
Engine Mechanical, Engine Code(s): AEB, ATW, Repair Group 26
- Check intake air system for leaks Page 24
-
97

- Check exhaust system for leaks:


Fuel pressure too low- Check fuel pressure regulator Page 24
-93


Oxygen Sensor (O2S) heater malfunction- Check O2S heater Page 24
-27
Pa
ge 32 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

24-91

Fuel injectors, checking for leakage


WARNING!

The fuel system is under pressure! Before
loosening hoses or opening the test
connection, cover the connection with a rag.
Only then, open carefully to slowly release
pressure.

Required special tools and test equipment

VW 1594 connector test kit
VAG 1630 digital potentiometer
VAG 1602 fuel analyzer

Checking

- Disconnect harness connector for Camshaft
Position (CMP) sensor -G40-.

- Disconnect vacuum hose from fuel pressure
regulator.

- Remove fuel rail together with fuel injectors.

Pa
ge 124 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

24-93

Fuel pressure regulator and residual
pressure, checking

The fuel pressure regulator controls the fuel
pressure depending on intake manifold
pressure.

Required special tools and test equipment

Pressure tester VAG 1318
Adapter 1318/11
Adapter 1318/12
Adapter 1318/13

Test requirements
Fuel pump delivery rate must be OK;
checking:

Repair Manual, Fuel Supply System, Repair
Group 20.


Checking
Pa
ge 127 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

WARNING!

The fuel system is under pressure! Before
loosening hoses or opening the test
connection, cover the connection with a rag.
Only then, open carefully to slowly release
pressure.
Pa
ge 128 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

24-94

- Open fuel filler cap briefly (release pressure).

- Cover the fuel supply line connection (arrow) to protect against fuel
spray.
- Slowly open connection and catch leaking fuel.

Note:
The valve on the pressure tester must be open (lever pointing in direction
of flow). - Connect pressure tester VAG 1318 to fuel rail using adapters VAG
1318/11, VAG 1318/12 and VAG 1318/13.
- Start engine and let run at idle.
- Measure fuel pressure.
Specified value: approx. 3.5 bar (50 psi)
Pa
ge 129 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1