39-34
Sequence for adjusting gear set
If pinion shaft and gear ring have to be adjusted, the following sequence
is recommended for maximum efficiency:
Note:
Overview of components and shims Page 39
-32
. 1.) Determine total shim thickness Stotal for S1 + S2 (adjusting preload
for tapered roller bearing for differential) Page 39
-53
.
2.) Determine total shim thickness Stotal for S3 + S4 (adjusting preload
for tapered roller bearing for pinion shaft) Page 39
-37
.
3.) Distribute total shim thickness Stotal for S3 + S4 so that the
dimension between the center of the gear ring and the face of the
pinion shaft equals dimension "R" which was determined during
production Page 39
-45
.
4.) Distribute total shim thickness Stotal S1 + S2, so that the specified
backlash between ring gear and pinion shaft is maintained Page
39
-61
.
Pa
ge 8 of 43 Pinion shaft and rin
g gear, ad
justin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.39.5
