00-11
Sealants
Thoroughly clean housing joint surfaces before
applying sealant.
Apply sealant AMV 188 000 02 or AMV 188 001
02 evenly and not too thick.
Breather holes must be free of sealant.
O-rings, gaskets, seals
Always replace O-rings, gaskets and seals.
After removing gaskets and seals, always
inspect the contact surfaces on the housing or
shaft for burrs resulting from removal, or for
other signs of damage.
Thoroughly clean housing joint surfaces before
assembling.
Before installing radial shaft seals, lightly oil outer edge and fill space
between sealing lip and dust lip (arrow) with oil. Open side of the seal faces toward the side containing the oil.When replacing seals, always vary the point at which the sealing lips
make contact (use insertion depth tolerances).
Pa
ge 3 of 10 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.00.4
