2000 AUDI A4 transmission

39-134


Pinion shaft, removing,
installing and servicing

Special tools and equipment

VW401 thrust plate
VW402 thrust plate
VW407 punch
VW408A punch
VW412 thrust disc
VW457 support channels
VW460/2 mandrel
VW519 sleeve
VW540 engine/transmission support
30-205 thrust pad

Pa
ge 1 of 13 Pinion shaft, removin
g, installin
g and servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.16

39-135

3062 thrust pad
3138 drift
3253 wheel bearing assembly set with 3253/3
and 3253/4
3304 bracket
VAG1383A engine/transmission support
VAG1359/2 universal mount
Kukko 17/2 separating tool
Kukko 21/7 extractor
Kukko 22/2 support
Torque gauge 0-600 Ncm (0-53 in. lb)
32 mm socket
Pa
ge 3 of 13 Pinion shaft, removin
g, installin
g and servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.16

39-139


Fig. 1 Tool to loosen and tighten pinion shaft nut
A- 32 mm socket

Fig. 2 Removing pinion shaft nut
- Screw 3304 bracket on using two M8 x 30 hex-head bolts.
- Final drive must be supported when loosening nut (e.g. using
VAG1359/2 universal transmission attachment in combination with
VAG1383A transmission jack).
Pa
ge 7 of 13 Pinion shaft, removin
g, installin
g and servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.16

39-144


Note:
If the specified friction torque is exceeded, the spacer sleeve must be
replaced and the adjustment repeated. A spacer sleeve that has been
over-compressed at any time cannot be reused. Fig. 11 Tightening nut for pinion shaft and measuring friction
torque
- Attach 3304 using two M8 x 30 hex-head bolts.
- Final drive must be supported when tightening nut (e.g. using
VAG1359/2 universal transmission attachment in combination with
VAG1383A transmission jack).
- Replace nut for pinion shaft.
- Tighten nut for pinion shaft, until no more play can be felt on pinion
shaft.
- Increase tightening torque until specified friction torque is attained,
measuring friction torque several times during this process Fig. 12
.
Pa
ge 12 of 13 Pinion shaft, removin
g, installin
g and servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.16