Tires
INDICATOR LOCATION MARKS
TREAD WEAR INDICATORS
Your car's tires have wear indicators molded into the tread. When the
tread wears down to that point, you
will see a 1/2 inch (12.7 mm) wide
band running across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. A
tire that is this worn gives very little
traction on wet roads. You should replace the tire if you can see the
tread wear indicator in three or more
places around the tire. Maintenance
In addition to proper inflation,
correct wheel alignment helps to decrease tire wear. If you find a tire
is worn unevenly, have your dealer
check the wheel alignment.
The tires were properly balanced by the factory. They may need to be
rebalanced at some time before they
are worn out. Have your dealer
check the tires if you feel a consis-
tent vibration while driving. A tire
should always be rebalanced if it is
removed from the wheel for repair. Make sure the installer balances the
wheels when you have new tires
installed. This increases riding
comfort and tire life. Your car's
original tires were dynamic or "spin"
balanced at the factory. For best
results, have the installer perform a dynamic balance.
Improper wheel weights can damage
your car's aluminum wheels. Use only Genuine Acura wheel weights for
balancing.
Maintenance
NOTICE
Index
Washing........................................ 246
Waxing and Polishing.................... 247
WheelsAdjusting the Steering......... ........... 68
Alignment and Balance.......... .......... 230
Compact Spare.......... ................ 254
Windows Cleaning.......... .............................. 249
Operating the Power......... ........... 95
Rear, Defogger......... ..................... 67
Windshield Cleaning........................................ 65
Wipers, Windshield Changing Blades.............................. 223
Operation....................................... . 65
Worn Tires.......... .............................. 229
Wrecker, Emergency Towing............ 277
*: U.S. and Canada only
