Additiona
l Informatio n Abou t You r Sea t Belt s
If the shoulder part of the belt is
pulled all the way out, the locking mechanism will activate. The belt
will retract, but it will not allow the passenger to move freely.
To deactivate the locking mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
See page 15 for instructions on how
to wear the lap/shoulder belt
properly.
Automati
c Sea t Bel t Tensioner s
For added protection, the front seat
belts are equipped with automatic
seat belt tensioners. When activated,
the tensioners immediately tighten
the belts to help hold the driver and a front passenger in place.
The tensioners are designed to activate primarily in frontal collisions.
The tensioners are independent of the airbag system, so they can beactivated during a collision that might not cause the airbags to
deploy. In this case, the airbags
would not be needed but the additional seat belt tension can be
helpful.
The tensioners will be activated in a collision severe enough to cause the
front airbags to inflate.
When the tensioners are activated, the seat belts will remain tight until
they are unbuckled in the normal
way.
The SRS indicator light willcome on if there is a
problem with your automatic seat
belt tensioners (see page 45).
Driver an d Passenge r Safet y
S R S
