Chapter 4 - Starting and driving
pg. 55 Starting and driving
Starting and driving
This section on starting and driving contains items such as starting the engine, operating the gear selector, towing,
trailers, etc.
Break-in period
56
Fuel requirements, Refueling56-57
Driving economy58
Starting the engine59
Manual transmission60
Automatic transmission61
Points to remember64
Emergency towing66
Vehicle towing information67
Jump starting68
Three-way catalytic converter69
Brake system70-71
Trailer towing72
Winter driving73
Long distance trips74
pg. 56 Break-in period, Fuel requirements
A new car should be broken -in
Refrain from utilizing your car's full driving potential during the first 1,200 miles (2,000 km) including the "kick -
down" function (automatic transmission).
NOTE - ENGINE OIL:
Although some oil consumption occurs during normal engine operation, more oil is consumed when the engine is new
as the internal parts generate higher friction while wearing-in to each other. From the time the engine is new until
the first service is performed, the oil consumption could be higher than normal. For this reason, it is especially
important to check the oil every time you refuel your car during this period. See page 114
.
In general, the rate of oil consumption depends on such factors as: engine temperature, length of trip, driving
conditions, oil viscosity and quality, engine speed and acceleration/deceleration.
Checking your engine oil level each time the car is refueled is one of the most important items you can perform to
help keep your car in good running order.
ProCarManuals.com
Chapter 9 - Specifications
pg. 123 Specifications
Specifications
This chapter contains facts and figures pertaining to the technical specifications of your car.
Oil/Fluids specifications
124
Engine specifications125
Cooling/fuel/distributor ignition systems126
Front/rear suspensions126
Transmission, Capacities, Vehicle loading127
Electrical system/bulbs128
Dimensions and weights129
Service manuals, Road assistance130
pg. 124 Oil/fluid specifications
Oil quality
Meeting API specification SG, SG/CD, SH or Energy Conserving (EC) II
For best fuel economy and engine protection, consult with your authorized Volvo retailer for recommended oils. Oil
with a different quality rating may not provide adequate engine protection. Synthetic oils complying with oil quality
requirements are recommended for : driving in areas of sustained temperature extremes (hot or cold), when towing a
trailer over long distances or for prolonged driving in mountainous areas.
Extra oil additives must not be used unless advised by an authorized Volvo retailer.
NOTE: SAE 15 W -40 oil should only be used in extreme operating conditions such as trailer towing in sustained
ambient temperatures over 104° F (40° C). However, SAE 10W -30 synthetic oil would be a better alternative in such
conditions.
SAE 15W-30 should not be used under normal operating conditions.
Viscosity (stable ambient temperatures):
Engine oilQuality: Meeting API specification SG or
SH Capacity (incl. filter): 6.1 US qts. (5.8
liters)*
Automatic transmission
fluid Quality:
ATF Dexron IIE/ III and Mercon Capacity: 8 US qts. (7.6 liters)
ProCarManuals.com
